Forum Post: RE: Debugging C6678 -- PC communication using Lightning...
Hi Chris, for a simple hello-word program you can load your program (.out) directly to a 6678 core using CCS+ a JTAG connected to your board. Your 8681 board has to be pluged/powered in a PCI slot in...
View ArticleForum Post: FPGA to C6678 EVM SRIO DMA Example
Hello,Is there a good example project to transfer data between an Altera Cyclone V FPGA dev kit and the TMS320C6678 dev kit? I want to use 4 lane SRIO for data transfer from the FPGA (master) to the...
View ArticleForum Post: RE: OMAP L137 highly unstable
Hello Shankari,We tried both things as you said. We have even tried with many SD cards. When we tried NFS filesystem, it says Unable to get nfsd port number from server. There is also a BUG in process...
View ArticleForum Post: RE: Hyperlink problem on 66AK2H12
So, you saw: Link seems stableAbout to try to read remote registersin the CIO console when K2H in non-loopback mode.What is the possibility to connect the 6678 with the debugger and try the no-boot...
View ArticleForum Post: How to run successful OMAP-L138 UPP capture
Hello,I'm using OMAP-L138 and CCS-5.4 forSW-1) bios_5_42_01_09SW-2) edma3_lld_01_11_03_01SW-3) pspdrivers_01_30_01SW-4) rtfs_1_10_02_32I created a project based on sample code on UPP and RTFS where UPP...
View ArticleForum Post: RE: L138 Power off Problem
Dinu,I hope you’ve not connect this PIN (EMA_A [15] / MMCSD0_DAT [6] / PRU1_R30 [23] / GP5 [15] / PRU1_R31 [23]) to any other device (Example: NOR) apart from controlling the Power module.It should be...
View ArticleForum Post: C6678 HyperLink Debugging
I'm attempting to verify the stability of our HyperLink on a custom board between a C6678 and Stratix IV running Integretek's HyperLink core.I've configured the C6678 EVM HyperLink test to run 4 lanes...
View ArticleForum Post: RE: Using ndk example with slave cores
Hi,I was running some tests and I realize the program works well if I load the image in all cores and run core by core. Core 0 runs ndk well.The problem is when I tried to group the cores, no message...
View ArticleForum Post: RE: DM3730 + gstreamer + ov5640 ISP camera problem
Hi Мichael, Sorry for long time to reply,Whats your question about ov5640 driver?Do you have already a part of code? Any example?I code the driver in linux-3.2.30, using v4l2-subdev interface. So, if...
View ArticleForum Post: RE: How to use the slice mode input with H264 Decoder in HDVICP2?
Hi Badri,Thanks for your reply! There are some examples in \DVRRDK_03.50.00.05\ti_tools\codecs\REL.500.V.H264AVC.D.HP.IVAHD.02.00.08.00\500.V.H264AVC.D.HP.IVAHD.02.00\IVAHD_001\client\test. I will try...
View ArticleForum Post: RE: fail to obtain SoC prompt of Hawkings board
Hi Vishal,The u-boot.bin and u-boot-keystone-evm.bin should be same.The u-boot-spl.bin, u-boot.img, and u-boot-spi.gph should be also as same as u-boot-spl-keystone-evm.bin, u-boot-keystone-evm.img,...
View ArticleForum Post: RE: EDMA3 - EMIFA used by DSP when Linux is running on ARM
It might be that you are using a EDMA channel/slot that Linux thinks is available to it. The ARM side will see the EDMA IRQ and try to handle it. Linux probably figured out it did not start the EDMA...
View ArticleForum Post: DM8127 encode link stop due to no output buffer
Hi,I am running IPNCRDK 3.5.0 on my own hardware with DM8127 processor. The usecase i am running is "mutich_encode_decode". The printDetail when I quit the application shows the following:[m3video]...
View ArticleForum Post: RE: Video quality lose after DEI link
hi Badri,How to bypass scalar if I find the input and output resolution are same?
View ArticleForum Post: DM8148 kernel build error
Dear All, I want to enable "USB Gadget Mode" in linux kernel, but I can't find the option "Inventra HDRC USB Peripheral" in USB Peripheral Controller . My linux version is DVR_RDK_3.00...
View ArticleForum Post: RE: Issues about the data flow in mcfw
Hi Badri,Thanks so much for your quick reply!You know my object is to construct a media server for video conference. Now the video and audio data flow are alright. But the video time delay is a bit too...
View ArticleForum Post: M3VPSS send video frame to DSP,DSP change video format,and send...
Hello,TI man.We wanna use DM8168 to perform a 6channel 1080P30 encode.However,now the bottleneck is NSF.Its capability is 250MHz,equal to change 4 1080P30 video format(4:2:2 to 4:2:0)at full load.So we...
View ArticleForum Post: RE: Facing issue in Interlaced encoding with EzSDK on DM814x...
Hi Brijesh,Configuration with Sample-2 seems to be correct to me since the inputHeight should be half of actual height.What is the issue with sample_2 now?Ram
View ArticleForum Post: TMS320C6713 debuged in Big Endian mode, load program into...
hi,ereryoneI have been trying to use the TMS320C6713B and Code Composer Studio V3.3 to perform a digital signal process.When the C6713 is running in little endian mode,it can perform very well. Now...
View ArticleForum Post: RE: Dynamic change of interframe interval in IPNC RDK 3.5?
Hi Neal,This problem is fixed at Dave Beal's end. Please have a look to http://e2e.ti.com/support/embedded/linux/f/354/p/283381/1002739.aspx#1002739You also try verifying input/output buffer handling...
View Article