Hi,
I am running IPNCRDK 3.5.0 on my own hardware with DM8127 processor. The usecase i am running is "mutich_encode_decode". The printDetail when I quit the application shows the following:
[m3video] ==================== EncLink_PrintDetails ====================
[m3video] 165892: HDVICP-ID:0
[m3video] totalAcquire2wait in msec: 2884844
[m3video] totalWait2Isr in msec: 1617
[m3video] totalIsr2Done in msec: 1
[m3video] totalWait2Done in msec: 1618
[m3video] totalDone2Release in msec: 0
[m3video] totalAcquire2Release in msec: 0
[m3video] totalAcq2acqDelay in msec: 0
[m3video] totalElapsedTime in msec: 0
[m3video] numAccessCnt: 0
[m3video] IVA-FPS : 0
[m3video]
[m3video] *** ENCODE Statistics ***
[m3video]
[m3video] Elasped Time : 139 secs
[m3video]
[m3video]
[m3video] CH | In Recv In Skip In User Out Latency
[m3video] Num | FPS FPS Skip FPS FPS Min / Max
[m3video] --------------------------------------------
[m3video] 0 | 25 24 0 0 31 / 31
[m3video]
[m3video] Multi Channel Encode Average Submit Batch Size
[m3video] Max Submit Batch Size : 24
[m3video] IVAHD_0 Average Batch Size : 1
[m3video] IVAHD_0 Max achieved Batch Size : 1
[m3video] ====================================}============================
It shows that the frames feed into the encoder being skipped. I have count that only few hundred frames being encoded successfully, and each time I run the application, the number of encoded frame is different. Further trace showing that the frame being skipped due to output buffer is not available. (I got this from "src_bios6\links_m3video\iva_enc\encLink_common.c") So what are the possible cause of running out of output buffer?
Thanks