Forum Post: RE: L138_Starterware cppi41dma
Norman san,Thank you very much.Please forgive me for one more question.Where did you get the base address of the INTD register region?Yasushi Mochizuki
View ArticleForum Post: RE: C6748 LCDK GPIO Interrupt service routine
Thank you Rajasekaran K,my interrupt routine now works.Petr Duga
View ArticleForum Post: RE: C6678 PLL stat remains in GO
Jayanth Do you mean that the software should not do anything before it come out of GO operation? But in terms of the CSL lib of PLL init,if PLL stay in GO for a long time, the program will not...
View ArticleForum Post: The problem for PC to access C6678
Hello We have accomplished bootloading the C6678 through PCIE from PC.Now we want to following things: PC boot a program to C6678; C6678 program will wait for PC's command to...
View ArticleForum Post: C6678 Cache for L2SRAM
Hello These days when I run some applications on C6678, I check the memory browser in CCS,and find that some region in L2SRAM turns to grey,which means it been cached,and we find it's...
View ArticleForum Post: RE: DM365 LCD interface using parallel RGB
Hi Renjith, We thought of using character device /dev/mtd0 or /dev/mtd1 ..etc... for driving the LCD which is connected on the same pins as the NAND Flash, with the following mapping:...
View ArticleForum Post: RE: address mapping for 5509
I have a 5509A dsp, and it uses an 8 bit input/output address mapping for it to read quickly from I/O without using the GPIO.I want to use a 16 bit Address mapping. but I don't any thing about it? I...
View ArticleForum Post: RE: C6670 Ethernet boot: interframe spacing requirement
Hello!Any updates on the topic?I'd like to point your attention, that 'pcsendpkt' program from mcsdk_2_01_02_06\tools\boot_loader\examples\ethernet\Ethernet_boot\ does contain a large useless loop in...
View ArticleForum Post: OMAP-L138 memory corruption
We are having an issue with our custom OMAP-L138 based target board. The specifically the issue is with the EMIFA interface. We have flash, FRAM, and an FPGA hanging on the Asynch Bus lines. 1)...
View ArticleForum Post: RE: Facing issue in Interlaced encoding with EzSDK on DM814x...
Hi Ram, Santhosh,We have tested capture encode application on EVM below is our observations.1. Test with default capture_encode application (Progressive Capture on ti8148EVM)Input Video : 1080iOutput...
View ArticleForum Post: RE: C667x sRIO BER testing with the embedded test patterns...
Hi Clinton,Thank you for your reply.I could understand that the line loopback mode is not available for the BER testing.Can the BER testing not perform without using the line loopback?The SRIO switches...
View ArticleForum Post: RE: L138_Starterware cppi41dma
No expert at this. I assumed that all the addresses in that document are relative to one base address. You noted an absolute address of 0x01E03200. I guessed a base address of 0x01E03000 giving an...
View ArticleForum Post: RE: generating 48KHz and 44.1KHz for DIT
Hi, looking at a similar setup.Connecting a 24.576MHz clock to mcasp0_ahclkx and a 22.5792MHz to mcasp0_ahclkr.Running a PCM1791A as slave @96 or 192kHz, and a PCM1851A slave @44.1kHzNeed some help on...
View ArticleForum Post: question about 430BOOST-C55AUDIO1
Hi, I have a question about this development tool,I have to reproduce stereo sound with headsets, ¿this tools supports audio reproduction without having the MSP-EXP430G2 LaunchPad Kit ?
View ArticleForum Post: RE: LTE Infrastructure development on TSDEVM6678LE
Hello!TI seems to have some kind of LTE library solution. In my attempt I was directed to some TI's partner salesman and communication vanished.What I'd like to point is that C6670 is far more...
View ArticleForum Post: RE: Problem about DM8168 video display time delay
This is a displayLink createParam. Refer /dvr_rdk/mcfw/src_linux/mcfw_api/usecases/ti81xx/multich_car_dvr.cmultich_cardvr_set_display_prmswhere displayPrm->queueInISRFlag = TRUE;Latency info is...
View ArticleForum Post: RE: Problem about DVRRDK 4.0
The GUI app requires lot of memory and it is not possible to run the app with 256M Linux configuration.It requires 2G total memory
View ArticleForum Post: RE: AM1808 EVM build environment
HiCould you able to build it for AM1808?Thanks.
View ArticleForum Post: RE: how to install arago file system ?
Hi Sagar,Could you please provide us the complete log of error message & uboot environment variables?Thanks.
View ArticleForum Post: RE: board cant get kernel image
Hi Sagar,You can get rid of above said error using patch:https://lkml.org/lkml/2013/1/21/754But this warning really not solves your problem.Please confirm.Here, the problem is u-boot not able to read...
View Article