Forum Post: RE: helloworld udp checksum error & recvFull issues
hi Eric , i have made that file by copy pasting , nimu_eth.c multiple time till i got the size. i will zip and share the exact file also.i willl also try with mcsdk setup.exe as the file here and see...
View ArticleForum Post: RE: Problem running a Programm with openMP
ok chad I keep you informedlopez
View ArticleForum Post: C6727B generate #NAN (not a number) from a function call just...
Hi,DSP C6727B is used in our product to perform a series digital filtering tasks. I have a released software to work inside the DSP. However occasionally, the same software is loaded into a unit, it...
View ArticleForum Post: GPIO EDMA Event Generation for 665X
I would like to use a GPIO28 to trigger an EDMA event. Is this possible? According to the documenation, I see mixed answers about what GPIOs can be used. The GPIO datasheet indicates GPIO0 to...
View ArticleForum Post: RE: Look for component 480P display setting.
Yulin,After double checking with our video expert, it seems that 27MHz at 16-bit should suffice (54MHz needed for 8-bits only).
View ArticleForum Post: RE: DM814X dvr_rdk 4.00.00.03 exceptions
Reattaching the map files.(Please visit the site to view this file)
View ArticleForum Post: RE: Latest version of MCSDK
How about the version of MCSDK for the TMDSEVM6657LS? http://software-dl.ti.com/sdoemb/sdoemb_public_sw/bios_mcsdk/latest/index_FDS.htmlThe above page has no mention of the above EVM (TMDSEVM6657LS).
View ArticleForum Post: RE: about the encode FPS
You mean encode decode s showing 45 fps not 4 fps right ? The issue looks to be because of SwMs dropping frames because of output buffer not available. Pls share your usecase file and data flow diagram...
View ArticleForum Post: RE: NDK hang after 20 minutes running
Hi, EricIt is confirmed that the hanging came from the C6678 PDK(v1.1.0.1) that I mistakenly used. After I updated CCS to v5.4 and MCSDK to 2.1.2.6, c6678 PDK to 1.1.2.6. they together work with NDK...
View ArticleForum Post: Please respond to OMAP Default Internal Pullup/Pulldown Sept 8, 2011
Submitted by Colin Koo.I need to know whether there is any anomaly in terms of pulls up/down on the OMAP-L138.Thanks.
View ArticleForum Post: RE: DM368 leopardboard
Bob, If i turn on the DM368 board UImage and U_boot.bin will be loaded from the sd card(because DIP switches are placed as 010), these UImage and U_boot.bin files in sd card should be write into the...
View ArticleForum Post: OMAP-L138 - TRM 20.2.6 Data Bus Parking vs floating EMIFA data bus
Hello, let me raise a few questions about TRM section 20.2.6 - Data Bus Parking.1. The one exception to this behavior occurs after performing an asynchronous read operation while the EMIFA is in the...
View ArticleForum Post: Ti8107 1080p setting for fb2
Hi all,Iam using ti8107 platform RDK version3.0. I wanted to output qt to frame buffer 2 which is to be displayed in SD. Presently my output is remains cropped.Vram confn : 0:8,1:8,2:4I tried...
View ArticleForum Post: RE: C67xx SPI Flash Booting (16bit or 24bit addressing)
Hi Norman,Could you clarify that if the SPI flash's space on >16MB can be used by the uboot/kernel/filesystem ?Thanks & Best Regards,Eason
View ArticleForum Post: RE: DM8148 ISS
Eliba,I checked the query posted in the other forum. To answer the query, I need to go through the stack before commenting. I need bit more time to find the answer.
View ArticleForum Post: Does DM814x support SPI flash 16MB as boot device ?
Hi,In TRM it says only support the 24 bit addressing SPI flash, which means only 16MB can be addressd.I also found this thread , it mentions that 16MB limitation is for ROM code only. Could you clarify...
View ArticleForum Post: RE: MIPI DSI LCD error
I have a similar issue.. can someone please respond to this?here is my logUncompressing Linux... done, booting the kernel.<6>Initializing cgroup subsys cpu<5>Linux version 3.0.8 (ravi@ravi)...
View ArticleForum Post: RE: TMS320C6747 problems initialising the control-registers of...
Peter,As you tell more about your problem, my suspicion turns to the PSC module. The McASP may be one of the many modules that must be enabled from power/clock off condition.If you are using our EVM,...
View ArticleForum Post: dsplink, lpm and cmem modules
Hi all,I've compiled these modules using my own toolchain with success with the default compiler flags(--with-fpu=vfpv3 --with-float=hard --with-mode=thumb)But I had a little trouble, when I tried to...
View ArticleForum Post: RE: an example for evmam1707 / OMAP-L137 of how to use EDMA with...
Sivaraj Hi , Thanks for your quick replyI have a reason for not using Linux on my board , basiclly I have managed already to port my entire code to theevmam1707 platform , I am running FreeRTOS using...
View Article