I have a similar issue.. can someone please respond to this?
here is my log
Uncompressing Linux... done, booting the kernel.
<6>Initializing cgroup subsys cpu
<5>Linux version 3.0.8 (ravi@ravi) (gcc version 4.4.3 (GCC) ) #3 SMP PREEMPT Sat Jul 20 16:14:14 IST 2013
CPU: ARMv7 Processor [411fc093] revision 3 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: mapphone_
<4>parse_tag_powerup_reason: powerup reason=0x00004000
<4>Ignoring unrecognised tag 0xf1000402
<4>Ignoring unrecognised tag 0xf1000403
<4>Ignoring unrecognised tag 0xf1000404
<4>Ignoring unrecognised tag 0xf1000405
<4>Ignoring unrecognised tag 0xf1000406
<6>parse_tag_mbm_version: mbm_version=0x00000a6c
<6>parse_tag_mbm_loader_version: mbm_loader_version=0x00000a6c
<4>Ignoring unrecognised tag 0xf1000409
<4>Ignoring unrecognised tag 0xf100040b
<4>Ignoring unrecognised tag 0xf100040c
<4>Ignoring unrecognised tag 0xf100040d
<6>parse_tag_battery_status_at_boot: battery_status_at_boot=0x00000001
<4>Ignoring unrecognised tag 0xf100040f
<4>Ignoring unrecognised tag 0xf1000410
<4>Ignoring unrecognised tag 0xf1000411
<4>Ignoring unrecognised tag 0xf1000412
<4>Ignoring unrecognised tag 0xf1000413
<6>flat_dev_tree_address=0x811da000, flat_dev_tree_size == 0x0000AA49
<6>android_display: setting default resolution 540*960, bpp=4
<6>android_display: tiler1d 33554432
<6>android_display: setting fb0.vram to 2211840
<6>android_display: setting vram to 2211840
<6>android_display: ion carveouts: 92798976 tiler2d, 7864320 nonsecure
<6>omap4_total_ram_size = 0x3ff00000
omap4_smc_size = 0x200000
omap4_ion_heap_secure_input_size = 0x1400000
omap4_ducati_heap_size = 0x8000000
omap4_ion_heap_tiler_mem_size = 0x1000
omap4_ion_heap_nonsec_tiler_mem_size = 0x1000
<6> omap4_smc_addr = 0xbfd00000
omap4_ion_heap_secure_input_addr = 0xbe900000
omap4_ducati_heap_addr = 0xb6900000
omap4_ion_heap_tiler_mem_addr = 0xb68ff000
omap4_ion_heap_nonsec_tiler_mem_addr = 0xb68fe000
<6>omap_ion_init: secure_input id=2 [be900000-bfd00000] size=1400000
<6>omap_ion_init: tiler id=1 [b68ff000-b6900000] size=1000
<6>omap_ion_init: nonsecure_tiler id=3 [b68fe000-b68ff000] size=1000
<6>omap_ion_init: system id=0 [0-0] size=0
<6>Reserving 12582912 bytes SDRAM for VRAM
Memory policy: ECC disabled, Data cache writealloc
<6>***********************<6>OMAP4430 ES2.3 type(HS)
<6>id-code (6b95c02f)
<6>Die-id (7A520006-00000001-0A3D478D-1401900E)
<6>Prod-id (C00DB95C-000600CC)
<6>***********************<3>Uninitialized omap_chip, please fix!
<6>SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000
<6>SMC: Allocated workspace of 0x300000 Bytes at (0xbfd00000)
<7>On node 0 totalpages: 219902
<7>free_area_init_node: node 0, pgdat c08e03c0, node_mem_map c1337000
<7> Normal zone: 1024 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 130048 pages, LIFO batch:31
<7> HighMem zone: 1022 pages used for memmap
<7> HighMem zone: 87808 pages, LIFO batch:15
clkdm: l3_dma_clkdm
clkdm: emu_sys_clkdm
clkdm: l4_wkup_clkdm
clkdm: l3_dss_clkdm
clkdm: iss_clkdm
clkdm: l3_d2d_clkdm
clkdm: l3_1_clkdm
clkdm: l3_2_clkdm
clkdm: ducati_clkdm
clkdm: l4_ao_clkdm
clkdm: l3_emif_clkdm
clkdm: mpu1_clkdm
Skipping mpu1
clkdm: mpu0_clkdm
clkdm: mpuss_clkdm
clkdm: l3_init_clkdm
clkdm: l3_instr_clkdm
clkdm: abe_clkdm
clkdm: l4_per_clkdm
clkdm: l4_secure_clkdm
clkdm: ivahd_clkdm
clkdm: l3_gfx_clkdm
clkdm: tesla_clkdm
clkdm: l4_cfg_clkdm
clkdm: l4_cefuse_clkdm
clkdm init done
<6>Unflattening device tree: 0xc1b3b0dc
<6>Unflattening device tree:
<6>magic: d00dfeed
<6>size: 0000aa49
<6>version: 00000010
<4>End of tree marker overwritten: efbeadde
<6>PERCPU: Embedded 7 pages/cpu @c1b4b000 s6848 r8192 d13632 u32768
<7>pcpu-alloc: s6848 r8192 d13632 u32768 alloc=8*4096
<7>pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 217856
<5>Kernel command line: root=/dev/ram0 rw mem=1023M@0x80000000 console=tty,19200n8 vram=10300K omapfb.vram=0:8256K,1:4K,2:2040K init=/init ip=off mmcparts=mmcblk1:p7(pds),p15(boot),p16(recovery),p17(cdrom),p18(misc),p19(cid),p20(kpanic),p21(system),p22(cache),p23(preinstall),p24(webtop),p25(userdata) mot_sst=1 androidboot.bootloader=0x0A73
<6>PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Memory: 512MB 346MB 0MB = 858MB total
<5>Memory: 859388k/859388k available, 188164k reserved, 355320K highmem
<5>Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffa00000 - 0xffe00000 ( 4 MB)
vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.init : 0xc0008000 - 0xc004e000 ( 280 kB)
.text : 0xc004e000 - 0xc0838af0 (8107 kB)
.data : 0xc083a000 - 0xc08e0ec0 ( 668 kB)
.bss : 0xc08e0ee4 - 0xc0a5a9b0 (1511 kB)
<6>Preemptible hierarchical RCU implementation.
<6>NR_IRQS:376
<4>omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
<6>OMAP clockevent source: GPTIMER1 at 32768 Hz
<6>sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
<6>Console: colour dummy device 80x30
<6>console [tty0] enabled
<6>Calibrating delay loop... <c>2384.28 BogoMIPS (lpj=9314304)
<6>pid_max: default: 32768 minimum: 301
<6>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys debug
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys freezer
<6>CPU: Testing write buffer coherency: ok
<3>ipi_timer::evt(3249844288)->event_handler==NULL
<6>L310 cache controller enabled
<6>l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x5e470000, Cache size: 1048576 B
clkdm: mpu1_clkdm
CPU1: Booted secondary processor
<6>Brought up 2 CPUs
<6>SMP: Total of 2 processors activated (4777.96 BogoMIPS).
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci
<4>omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
<4>omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
<4>omap_hwmod: mcpdm: cannot be enabled (3)
<6>print_constraints: dummy:
<6>NET: Registered protocol family 16
<6>GPMC revision 6.0
<6>EMIF0 is enabled with IRQ142
<6>EMIF1 is enabled with IRQ143
<6>Last reset was reset (PRM_RSTST=0x0)
<6>OMAP GPIO hardware version 0.1
<6>omap_mux_init: Add partition: #1: core, flags: 2
<6>omap_mux_init: Add partition: #2: wkup, flags: 2
<3>Read RST TIME=40c8
<3>Reset time is configured!=40c8
<6>get_ap_ddr_size: AP DDR size = 1024 MB
<6>mapphone_touch_panel_init: Starting touch init...
<6>mapphone_touch_panel_init: Touch init successful for atmxt-i2c driver.
<3>Unable to get gpio pin num for tmp105_int
<6>I2C-1 devices: lm3532
<6>lm3532 -> I2C bus-1
<6>I2C-2 devices: atmxt-i2c,isl29030_als_ir
<6>atmxt-i2c -> I2C bus-2
<6>isl29030_als_ir -> I2C bus-2
<6>I2C-4 devices: akm8975,lis3dh
<6>akm8975 -> I2C bus-4
<6>Using cpcap switchers
<1>WARNING: MiniUSB port works in UART3 mode,the USB functionality UNAVAILABLE!
<3>Unable to get gpio pin num for ipc_o_ap_reset_bp
<7>mapphone_ste_m570_init_gpio: can't get ipc_o_ap_reset_bp from device_tree
<3>Unable to get gpio pin num for ipc_o_bp_onswc
<7>mapphone_ste_m570_init_gpio: can't get ipc_o_bp_onswc from device_tree
<6>CPCAP: using default bus_num 1
<3>Read property wireless_chrg_capability error!
<6>CPCAP: WHISPER Supported? [1]!
<6>CPCAP: WHISPER BP BYPASS Supported? [0]!
<6>CPCAP: WHISPER mux_sel1 [60]!
<6>CPCAP: WHISPER mux_sel2 [0]!
<3>Read property usbhs_ext_power error!
<6>cpcap init size = 1
<6>CPCAP: Overwrite regulator init [20]!
<3>Unable to get gpio pin num for fact_kill_override
<3>Unable to read node /System@0/Audio@0 from device tree!
<6>cpcap_leds_init Configuring CPCAP LED drivers
<6>LED Controller found.
<6>CPCAP KPB found.
<6>LED Controller found.
<6>CPCAP RGB found.
<6>External charger ic init
<6>board_panel: DT: width= 540 height= 960
<6>board_panel: DT: hfp=0 hsw=2 hbp=2 vfp=0 vsw=1 vbp=1
<6>board_panel: DT: gpio_reset=101 panel_id=0x1a0002
<6>board_panel: DT: phy.dsi: pixel_size=24 te_scan_line=300
<6>board_panel: DT: phy.dsi: data1_lane=2 data1_pol=0
<6>board_panel: DT: phy.dsi: data2_lane=3 data2_pol=0
<6>board_panel: DT: clocks.dsi : regn=13 regm=230
<6>board_panel: DT: clocks.dsi : regm3=6 regm4=6
<6>board_panel: DT: clocks.dsi : lp_clk_div=9, lck_div=1, pck_div=4
<6>board_panel: DT: phy.dsi.type=0
<6>vib_of_init pwm len 16 size 1
<6>vib_of_init voltage len 24 size 2
<6>mapphone_vibrator_init vibrator type 0x17 min 0 max 60000
<3>Unable to get gpio pin num for msp430_reset
<6>STMicro,LIS3DH found!
<6>AsahiKasei,AKM8975 found!
<6>Intersil,ISL29030 found!
<6>National,LM3532 found!
<5>Disabling USBHost in the Platform
<6>USB MUSB Init-Initial value of CLKCTRL is 0x70000
<6>USB MUSB Post-Initial value of CLKCTRL is 0x70000
<3>USB Overwrite nLuns 1
<3>Read property usb_pids error!
<3>Unable to get gpio pin num for external_amp_en
<3>Unable to get gpio pin num for lm48901_amp_en
<6>feature_qmi_over_spi=0
<6>OMAP DMA hardware revision 0.0
<4>omap_rproc_get_pool: carveout memory is unavailable: 0x0, 0x0
<6>HSI: device registered as omap_hwmod: hsi
<6>bio: create slab <bio-0> at 0
<6>print_constraints: hdmi_5v_en: 5000 mV
<5>SCSI subsystem initialized
<4>cpcap-regltr: probe of cpcap-regltr.0 failed with error -22
<4>cpcap-regltr: probe of cpcap-regltr.1 failed with error -22
<4>cpcap-regltr: probe of cpcap-regltr.2 failed with error -22
<4>cpcap-regltr: probe of cpcap-regltr.3 failed with error -22
<6>print_constraints: sw5: 5050 mV
<3>machine_constraints_voltage: vusb: failed to apply 3300000uV constraint
<4>cpcap-regltr: probe of cpcap-regltr.21 failed with error -22
<6>print_constraints: vcam: 2900 mV
<6>print_constraints: vcsi: 1800 mV
<6>print_constraints: vdac: 1800 mV
<6>print_constraints: vdig: 1875 mV
<6>print_constraints: vfuse: 1500 <--> 3150 mV
<6>print_constraints: vhvio: 2775 mV
<6>print_constraints: vsdio: 2900 mV
<6>print_constraints: vpll: 1200 <--> 1800 mV
<6>print_constraints: vrf1: 2775 mV
<6>print_constraints: vrf2: 2775 mV
<6>print_constraints: vrfref: 2500 <--> 2775 mV
<6>print_constraints: vwlan1: 1800 <--> 1900 mV
<6>print_constraints: vwlan2: 3000 mV
<6>print_constraints: vsim: 1800 <--> 2900 mV
<6>print_constraints: vsimcard: 1800 <--> 2900 mV
<6>print_constraints: vvib: 1800 <--> 3000 mV
<6>print_constraints: vaudio: 2775 mV normal standby
<6>cpcap_uc cpcap_uc: Loaded Sec SPI Init = 1: 0
<6>cpcap_uc cpcap_uc: Started macro 4: 0
<6>cpcap spi1.0: cpcap_adc_probe: CHRGI Cal complete!
<6>cpcap spi1.0: cpcap_adc_probe: BATTI Cal complete!
<6>cpcap_adc cpcap_adc: CPCAP ADC device probed
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>cpcap_usb cpcap_usb: Initialized CPCAP USB module
<6>omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
<6>omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
<6>omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
<6>omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
<6>omap-rproc omap-rproc.0: dsp is available
<6>omap-rproc omap-rproc.1: ipu is available
<6>Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>Bluetooth: Core ver 2.16
<6>NET: Registered protocol family 31
<6>Bluetooth: HCI device and connection manager initialized
<6>Bluetooth: HCI socket layer initialized
<6>Bluetooth: L2CAP socket layer initialized
<6>Bluetooth: SCO socket layer initialized
<6>Switching to clocksource 32k_counter
<6>Switched to NOHz mode on CPU #0
<6>Switched to NOHz mode on CPU #1
<6>musb-hdrc: version 6.0, musb-dma, otg (peripheral+host)<7>musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine (X) , bulk split (X) , HB-ISO Rx, HB-ISO Tx, SoftConn)
<7>musb-hdrc: MHDRC RTL version 2.0
<7>musb-hdrc: setup fifo_mode 4
<7>musb-hdrc: 28/31 max ep, 15424/16384 memory
<6>musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>TCP established hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>TCP: Hash tables configured (established 65536 bind 65536)
<6>TCP reno registered
<6>UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>NET: Registered protocol family 1
<6>Trying to unpack rootfs image as initramfs...
<6>Freeing initrd memory: 880K
<3>Unable to read node /System@0/GPIODev@0 from device tree!
<3>Unable to get gpio pin num for slider_data
<3>Unable to get gpio pin num for volume_gpio
<3>Unable to get gpio pin num for ste_wakeup_ap
<6>ram_console: got buffer at a0000000, size 200000
<6>ram_console: found existing buffer, size 110271, start 110271
<6>console [ram-1] enabled
<6>omap-iommu omap-iommu.0: ducati registered
<6>omap-iommu omap-iommu.1: tesla registered
highmem bounce pool size: 64 pages
<6>ashmem: initialized
<6>fuse init (API version 7.16)
<6>msgmni has been set to 986
<6>Registering char device tf_driver (122:0)
<6>SMCAG01.06e1.0 D
<6>io scheduler noop registered (default)
<6>io scheduler deadline registered
<6>io scheduler cfq registered
<6>lm3532_bl 1-0038: Rev. F4 Backlight
<6>OMAP DSS rev 4.0
<6>dsscomp: initializing.
<7>misc dsscomp: display0=mapphone-panel
<7>misc dsscomp: display1=hdmi_panel
<6>misc dsscomp: found 2 displays and 4 overlays
<3>could not allocate slot<6>omap-rproc omap-rproc.1: powering up ipu
<6>virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully
<6>virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully
Enabling uart clocks
<6>omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
Enabling uart clocks
<6>omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
Enabling uart clocks
<6>omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
<6>GPIODev init successfully
<6>omap_ion_probe: adding heap secure_input of type 2 with be900000@1400000
<6>omap_ion_probe: adding heap tiler of type 4 with b68ff000@1000
<6>omap_ion_probe: adding heap nonsecure_tiler of type 4 with b68fe000@1000
<6>omap_ion_probe: adding heap system of type 0 with 0@0
<6>brd: module loaded
<6>loop: module loaded
<6>(stk) :sysfs entries created
<6>(stk) : debugfs entries created <6>Loading pn544 driver
<6>Android kernel panic handler initialized (bind=kpanic)
<6>AKM8975 compass driver: initialize
<4>------------[ cut here ]------------
<4>WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:138 l3_interrupt_handler+0x2f4/0x3a0()
CUSTOM SRESP error with SOURCE:L4 PER3
<d>Modules linked in:
[<c0059f20>] (unwind_backtrace+0x0/0xfc) from [<c00986f4>] (warn_slowpath_common+0x4c/0x64)
[<c00986f4>] (warn_slowpath_common+0x4c/0x64) from [<c00987a0>] (warn_slowpath_fmt+0x30/0x40)
[<c00987a0>] (warn_slowpath_fmt+0x30/0x40) from [<c007359c>] (l3_interrupt_handler+0x2f4/0x3a0)
[<c007359c>] (l3_interrupt_handler+0x2f4/0x3a0) from [<c00d7fc8>] (handle_irq_event_percpu+0x50/0x180)
[<c00d7fc8>] (handle_irq_event_percpu+0x50/0x180) from [<c00d8134>] (handle_irq_event+0x3c/0x5c)
[<c00d8134>] (handle_irq_event+0x3c/0x5c) from [<c00da6e4>] (handle_fasteoi_irq+0x98/0x104)
[<c00da6e4>] (handle_fasteoi_irq+0x98/0x104) from [<c00d7bb4>] (generic_handle_irq+0x2c/0x38)
[<c00d7bb4>] (generic_handle_irq+0x2c/0x38) from [<c004e04c>] (asm_do_IRQ+0x4c/0xac)
[<c004e04c>] (asm_do_IRQ+0x4c/0xac) from [<c0054148>] (__irq_svc+0x48/0xe0)
Exception stack(0xdf84fd60 to 0xdf84fda8)
fd60: c09257c0 a0000013 00000038 00000000 c09257c0 df84fda8 ffff6c38 c09257c0
fd80: c083c080 c08480e0 c004c58c ffff6bb8 ffff6bb9 df84fda8 c05f12fc c05f32a0
fda0: 80000013 ffffffff
[<c0054148>] (__irq_svc+0x48/0xe0) from [<c05f32a0>] (_raw_spin_unlock_irqrestore+0x18/0x40)
[<c05f32a0>] (_raw_spin_unlock_irqrestore+0x18/0x40) from [<c05f12fc>] (schedule_timeout+0x144/0x1f8)
[<c05f12fc>] (schedule_timeout+0x144/0x1f8) from [<c05f05d4>] (wait_for_common+0xbc/0x160)
[<c05f05d4>] (wait_for_common+0xbc/0x160) from [<c039ba40>] (omap_i2c_xfer+0x350/0x81c)
[<c039ba40>] (omap_i2c_xfer+0x350/0x81c) from [<c0398a84>] (i2c_transfer+0xa8/0x118)
[<c0398a84>] (i2c_transfer+0xa8/0x118) from [<c02cbe14>] (AKI2C_RxData+0x68/0xe8)
[<c02cbe14>] (AKI2C_RxData+0x68/0xe8) from [<c02cbf5c>] (akm8975_probe+0xc8/0x488)
[<c02cbf5c>] (akm8975_probe+0xc8/0x488) from [<c0397838>] (i2c_device_probe+0xac/0xe4)
[<c0397838>] (i2c_device_probe+0xac/0xe4) from [<c02baaec>] (driver_probe_device+0x98/0x1a8)
[<c02baaec>] (driver_probe_device+0x98/0x1a8) from [<c02bac88>] (__driver_attach+0x8c/0x90)
[<c02bac88>] (__driver_attach+0x8c/0x90) from [<c02ba338>] (bus_for_each_dev+0x60/0x8c)
[<c02ba338>] (bus_for_each_dev+0x60/0x8c) from [<c02b9c08>] (bus_add_driver+0xa0/0x234)
[<c02b9c08>] (bus_add_driver+0xa0/0x234) from [<c02bb27c>] (driver_register+0x78/0x140)
[<c02bb27c>] (driver_register+0x78/0x140) from [<c0397c18>] (i2c_register_driver+0x2c/0xb4)
[<c0397c18>] (i2c_register_driver+0x2c/0xb4) from [<c004e648>] (do_one_initcall+0x34/0x17c)
[<c004e648>] (do_one_initcall+0x34/0x17c) from [<c0008524>] (kernel_init+0x8c/0x134)
[<c0008524>] (kernel_init+0x8c/0x134) from [<c0055058>] (kernel_thread_exit+0x0/0x8)
<4>---[ end trace 1837f67182ad108f ]---
<3>Infor 0x00000000
<3>Master 0x00000000 MPU
<3>L4 PER3 OPCODE 0x00000000
<3>omap_rpmsg_mbox_callback: ipu has just crashed !
<6>_event_notify: remoteproc: ipu has crashed
<3>rpmsg_rproc_error: Fatal error in ipu
<3>rpmsg_rproc_error: Fatal error in ipu
<6>input: compass as /devices/virtual/input/input0
<3>omap_rpmsg_mbox_callback: ipu has just crashed !
<6>Inserting sec module
<6>Android kernel panic mmc handler initialized
<3>rpmsg_reset_work: reseting virtio device 0
<6>rpmsg_resmgr rpmsg0: Enter rprm_remove
<4>i2c-core: driver [attiny48mu_cap_prox] using legacy suspend method
<4>i2c-core: driver [attiny48mu_cap_prox] using legacy resume method
<6>KXTF9 accelerometer driver
<6><3>MSP430 msp430 sensor processor
<6>L3G4200D gyroscope driver
<6>LIS3DH accelerometer driver
<3>lis3dh 4-0019: write transfer error
<3>lis3dh 4-0019: write transfer error
<3>lis3dh 4-0019: soft power off failed
<4>lis3dh: probe of 4-0019 failed with error -5
<6>tcmd probe
<6>ts27010 mux registered
<3>vib-pwm: vib_pwm_init
<6>input: cpcap-key as /devices/virtual/input/input1
<6>cpcap_key cpcap_key: CPCAP key device probed
<3>regulator_check_voltage: vaudio: operation not allowed
<6>cpcap spi1.0: New headset state: 0
<6>PPP generic driver version 2.4.2
<6>PPP Deflate Compression module registered
<6>PPP BSD Compression module registered
<6>PPP MPPE Compression module registered
<6>NET: Registered protocol family 24
<6>tun: Universal TUN/TAP device driver, 1.6
<6>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>usbcore: registered new interface driver asix
<6>usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver net1080
<6>usbcore: registered new interface driver cdc_subset
<6>usbcore: registered new interface driver zaurus
<6>cdc_ncm: 04-Aug-2011
<6>usbcore: registered new interface driver cdc_ncm
<6>QCUSBNet2k: 1.0.110+google
<6>usbcore: registered new interface driver QCUSBNet2k
<6>usbcore: registered new interface driver zd1201
<6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>usbcore: registered new interface driver cdc_acm
<6>cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>usbcore: registered new interface driver usblp
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>usbcore: registered new interface driver usbserial
<6>usbserial: USB Serial Driver core
<6>USB Serial support registered for moto-modem
<6>usbcore: registered new interface driver moto-modem
<6>USB Serial support registered for moto-flashqsc
<6>usbcore: registered new interface driver moto-flashqsc
<6>oob_wake_init: initializing oob-wake
<6>android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=1
<6> lun0: LUN: removable file: (no medium)
<6>android_usb gadget: android_usb ready
<6>musb-hdrc musb-hdrc: MUSB HDRC host driver
<6>musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: MUSB HDRC host driver
<6>usb usb1: Manufacturer: Linux 3.0.8 musb-hcd
<6>usb usb1: SerialNumber: musb-hdrc
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<6>mousedev: PS/2 mouse device common for all mice
<6>input: omap4-keypad as /devices/platform/omap/omap4-keypad/input/input2
<6>usbcore: registered new interface driver xpad
<6>atmxt_probe: Driver: atmxt-i2c, Version: TF-11-00, Date: 2012-04-04
<6>input: atmxt-i2c as /devices/virtual/input/input3
<6>atmxt_set_ic_state: IC state UNKNOWN -> PRESENT
<6>atmxt_restart_ic: Family ID: 0x81, Variant ID: 0x01, Version: 0x04, Build: 0x31, Matrix: 19x11, Objects: 18
<6>atmxt_message_handler6: Touch IC reset complete.
<6>atmxt_message_handler6: Touch IC is calibrating.
<6>atmxt_set_ic_state: IC state PRESENT -> ACTIVE
<6>atmxt_set_drv_state: Driver state PROBE -> ACTIVE
<6>atmxt_probe: Probe successful.
<6>BMP180 barometer driver
<6>atmxt_message_handler6: Touch IC calibration complete.
<6>input: light-prox as /devices/virtual/input/input4
<4>i2c-core: driver [max9635] using legacy suspend method
<4>i2c-core: driver [max9635] using legacy resume method
<6>using input dev cpcap-key for key reset
<6>using input dev omap4-keypad for key reset
<6>using rtc device, cpcap_rtc, for alarms<6>cpcap_rtc cpcap_rtc: rtc core: registered cpcap_rtc as rtc0
<6>i2c /dev entries driver
<6>lirc_dev: IR Remote Control driver registered, major 245
<6>IR NEC protocol handler initialized
<6>IR RC5(x) protocol handler initialized
<6>IR RC6 protocol handler initialized
<6>IR JVC protocol handler initialized
<6>IR Sony protocol handler initialized
<6>IR RC5 (streamzap) protocol handler initialized
<6>IR LIRC bridge handler initialized
<6>Linux video capture interface: v2.00
<6>gspca: v2.13.0 registered
<6>usbcore: registered new interface driver benq
<6>usbcore: registered new interface driver conex
<6>usbcore: registered new interface driver cpia1
<6>usbcore: registered new interface driver etoms
<6>usbcore: registered new interface driver finepix
<6>usbcore: registered new interface driver jeilinj
<6>usbcore: registered new interface driver kinect
<6>usbcore: registered new interface driver konica
<6>usbcore: registered new interface driver mars
<6>usbcore: registered new interface driver mr97310a
<6>usbcore: registered new interface driver nw80x
<6>usbcore: registered new interface driver ov519
<6>usbcore: registered new interface driver ov534
<6>usbcore: registered new interface driver ov534_9
<6>usbcore: registered new interface driver pac207
<6>usbcore: registered new interface driver pac7302
<6>usbcore: registered new interface driver pac7311
<6>usbcore: registered new interface driver sn9c2028
<6>usbcore: registered new interface driver sn9c20x
<6>usbcore: registered new interface driver sonixb
<6>usbcore: registered new interface driver sonixj
<6>usbcore: registered new interface driver spca500
<6>usbcore: registered new interface driver spca501
<6>usbcore: registered new interface driver spca505
<6>usbcore: registered new interface driver spca506
<6>usbcore: registered new interface driver spca508
<6>usbcore: registered new interface driver spca561
<6>usbcore: registered new interface driver spca1528
<6>usbcore: registered new interface driver sq905
<6>usbcore: registered new interface driver sq905c
<6>usbcore: registered new interface driver sq930x
<6>usbcore: registered new interface driver sunplus
<6>usbcore: registered new interface driver stk014
<6>usbcore: registered new interface driver stv0680
<6>usbcore: registered new interface driver t613
<6>usbcore: registered new interface driver tv8532
<6>usbcore: registered new interface driver vc032x
<6>usbcore: registered new interface driver vicam
<6>usbcore: registered new interface driver xirlink-cit
<6>usbcore: registered new interface driver zc3xx
<6>usbcore: registered new interface driver ALi m5602
<6>usbcore: registered new interface driver STV06xx
<6>usbcore: registered new interface driver gspca_gl860
<6>usbcore: registered new interface driver uvcvideo
<6>USB Video Class driver (v1.1.0)
<6>dmm: probe base: fd300000, irq 145
<6>Driver for 1-wire Dallas network protocol.
<6>omap_hdq omap_hdq.0: OMAP HDQ Hardware Rev 0.6. Driver in Interrupt mode
<6>w1_master_driver w1 bus master: Family 89 for 89.000000000000.5b is not registered.
<6>OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
<6>Bluetooth: HCI UART driver ver 2.2
<6>Bluetooth: HCI H4 protocol initialized
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<7>Registered led device: button-backlight
<7>Registered led device: red
<7>Registered led device: green
<7>Registered led device: blue
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
<6>zram: num_devices not specified. Using default: 1
<6>zram: Creating 1 devices ...
<6>OMAP HSI: HSI driver version 0.4.3
<6>omap_hsi omap_hsi.0: Registering IRQ hsi_p1_mpu (99)
<6>omap_hsi omap_hsi.0: HSI port 1 initialized
<6>omap_hsi omap_hsi.0: Registering IRQ hsi_dma_mpu (103)
<6>omap_hsi omap_hsi.0: HSI Hardware REVISION 0x50043101
<4>omap_hsi omap_hsi.0: Cannot set HSI FClk to default value: 96000000. Will retry on next open
<6>usbcore: registered new interface driver snd-usb-audio
<6>ENTER: MOTSND SoC init
<6>asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
<6>asoc: cpcap codec <-> omap-mcbsp-dai.2 mapping ok
<6>asoc: cpcap in-call <-> MODEM mapping ok
<6>asoc: cpcap fm <-> FMDummy mapping ok
<6>asoc: cpcap bt-call <-> MODEM mapping ok
<6>asoc: cpcap bt <-> omap-mcbsp-dai.2 mapping ok
<6>asoc: null-codec-dai <-> omap-mcasp-dai mapping ok
<6>asoc: BPVoice <-> omap-mcbsp-dai.2 mapping ok
<6>mmc1: new high speed MMC card at address 0001
<6>mmcblk1: mmc1:0001 SEM08G 7.39 GiB
<6>asoc: cpcap stdac <-> omap-mcbsp-dai.1 mapping ok
<6>mmcblk1boot0: mmc1:0001 SEM08G partition 1 1.00 MiB
<6>asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
<6>ALSA device list:
<6> #0: Motorola MAPPHONE
<6>mmcblk1boot1: mmc1:0001 SEM08G partition 2 1.00 MiB
<6> #1: OMAP4HDMI
<6>GACT probability NOT on
<6>Mirror/redirect action on
<6>u32 classifier
<6> Actions configured
<6>Netfilter messages via NETLINK v0.30.
<6>nf_conntrack version 0.5.0 (13441 buckets, 53764 max)
<6> mmcblk1: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 >
<6>ctnetlink v0.93: registering with nfnetlink.
<6>NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6> mmcblk1boot1: unknown partition table
<6>xt_time: kernel timezone is -0000
<6> mmcblk1boot0: unknown partition table
<6>mmc_blk_probe: adding mmcblk0p20:kpanic
<3>apanic: Bound to mmc block device 'mmcblk0p20(179:20)'
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>arp_tables: (C) 2002 David S. Miller
<6>TCP cubic registered
<6>apanic: No panic data available
<6>NET: Registered protocol family 10
<6>Mobile IPv6
<6>ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>IPv6 over IPv4 tunneling driver
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<5>Bridge firewalling registered
<6>Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>NET: Registered protocol family 35
<6>NET: Registered protocol family 37
<4>mapphone_zerov_ctrl_init: Invalid or no ctrl regulator
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<6>ThumbEE CPU extension supported.
<5>Registering SWP/SWPB emulation handler
<6>Reprogramming LPDDR2 timings to 400000000 Hz
<3>Power Management for TI OMAP4.
<6>OMAP4 PM: Static dependency added between MPUSS <-> EMIF, MPUSS <-> L4_PER/CFG MPUSS <-> L3_MAIN_1.
<6>OMAP4 PM: Static dependency added between DUCATI <-> L4_PER/CFG and DUCATI <-> L3.
<6>omap4_idle_init:qos_add_request for CPU_DMA_LATENCY for 120secs
<4>sr_init: No PMIC hook to init smartreflex
<6>smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
<6>smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
<6>smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
<6>SmartReflex Class3 initialized
<4>mmc2: card claims to support voltages below the defined range. These will be ignored.
<6>clock: disabling unused clocks to save power
<4>mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
<6>mmc2: new high speed SDIO card at address 0001
<6>cannot apply mgr(lcd) on inactive device
<3>fbcon_init: detected unhandled fb_set_par error, error code -19
<6>Console: switching to colour frame buffer device 67x60
<6>cannot apply mgr(lcd) on inactive device
<4>omapfb omapfb: failed to apply dispc config
<6>cannot apply mgr(tv) on inactive device
<4>omapfb omapfb: failed to apply dispc config
<6>cannot apply mgr(lcd2) on inactive device
<4>omapfb omapfb: failed to apply dispc config
<6>DSI: dsi_vc_cmd = 0, dsi_vc_video = 1
<6>DT: x_res=540 y_res=960 phy_w_mm=54 phy_h_mm=95
<6>DT: hfp=0 hsw=2 hbp=2 vfp=0 vsw=1 vbp=1
<6>DT: clk_lane=1 clk_pos=0 d1_lane=2 d1_pos=0 d2_lane=3 d2_pos=0
<6>DT: d3_lane=0 d3_pos=0 d4_lane=0 d4_pos=0
<6>DT: panel_id=0x1a0002 type= 0
<6>DT: regn=13 regm=230 regm3=6 regm4=6 lp_clk_div=9 lck_div=1 pck_div=4
<6>DT: te_support=1, te_type=0
<6>DT: number of power supplies=1<6>DT: Supply #0, reg name=sw5, gpio=96, gpio_en_val=1
<4>mmc0: host does not support reading read-only switch. assuming write-enable.
<6>mmc0: new high speed SDHC card at address aaaa
<6>mmcblk0: mmc0:aaaa SU16G 14.8 GiB
<6> mmcblk0: p1
<3>omapdss DSI error: Failed to receive BTA
<3>omapdss DSI error: Failed to receive BTA
<3>omapdss DSI error: Failed to receive BTA
<3>omapdss DSI error: Failed to receive BTA
<3>omapdss DSI error: Failed to receive BTA
<3>omapdss DSI error: Failed to receive BTA
<3>omapdss DSI error: Failed to receive BTA
<5>CPU1: shutdown
<3>omapdss DSI error: Failed to receive BTA
<3>omapdss DSI error: Failed to receive BTA
<3>omapdss DSI error: Failed to receive BTA
<3>omapdss DSI error: Failed to receive BTA
<3>check_mapphone_panel_present: Failed to receive BTA ACK for 10 times.
<4>mapphone_panel_power_on:Panel is not attached or failed to send BTA.
<4>omapfb omapfb: Failed to enable display 'lcd'
<3>omapfb omapfb: failed to initialize default display
<6>Console: switching to colour dummy device 80x30
<3>omapfb omapfb: failed to setup omapfb
<4>omapfb: probe of omapfb failed with error -22
<6>regulator_init_complete: vwlan1: disabling
<6>regulator_init_complete: vrfref: disabling
<6>lm3532_bl_work: Display backlight disabled
<6>regulator_init_complete: vrf2: disabling
<3>cpcap_usb_det cpcap_usb_det: Could not get regulator for cpcap_usb
<6>cpcap_rtc cpcap_rtc: setting system clock to 2013-07-20 10:46:58 UTC (1374317218)
<6>Freeing init memory: 280K
<3>init: /init.mapphone_umts.rc: 773: invalid command 'term'
<3>init: /init.mapphone_umts.rc: 775: invalid command 'term'
<3>init: /init.mapphone_umts.rc: 1074: invalid option 'write'
<3>init: /init.mapphone_umts.rc: 1075: invalid option 'write'
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>keychord: using input dev omap4-keypad for fevent
<3>init: cannot open '/initlogo.rle'
<6>init: command 'loglevel' r=0
<6>init: command 'export' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'symlink' r=0
<6>init: command 'symlink' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'symlink' r=0
<6>init: command 'chown' r=-2
<6>init: command 'chmod' r=0
<6>init: command 'chmod' r=-2
<6>init: command 'chown' r=0
<6>init: command 'chown' r=-2
<6>init: command 'chown' r=-2
<6>init: processing action 0x49a20 (init)
<6>init: command 'export' r=0
<6>init: command 'export' r=0
<6>init: command 'export' r=0
<6>init: processing action 0x49210 (fs)
<6>init: command 'exec' r=0
<6>EXT3-fs: barriers not enabled
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3-fs (mmcblk1p25): using internal journal
<6>EXT3-fs (mmcblk1p25): recovery complete
<6>EXT3-fs (mmcblk1p25): mounted filesystem with ordered data mode
<6>init: command 'exec' r=0
<6>init: command 'exec' r=0
<6>init: command 'exec' r=0
<4>EXT3-fs (loop3): warning: ignoring deprecated nobh option
<3>EXT3-fs (loop3): error: unrecognized mount option "noauto_da_alloc" or missing value
<4>EXT4-fs (loop3): Ignoring deprecated nobh option
<6>EXT4-fs (loop3): mounted filesystem without journal. Opts: nobh,noauto_da_alloc,barrier=0,data=writeback
<6>init: command 'exec' r=0
<4>EXT3-fs (mmcblk1p7): warning: ignoring deprecated nobh option
<3>EXT3-fs (mmcblk1p7): error: unrecognized mount option "noauto_da_alloc" or missing value
<4>EXT4-fs (mmcblk1p7): Ignoring deprecated nobh option
<6>EXT4-fs (mmcblk1p7): barriers disabled
<4>EXT4-fs (mmcblk1p7): warning: maximal mount count reached, running e2fsck is recommended
<6>EXT4-fs (mmcblk1p7): mounted filesystem with writeback data mode. Opts: nobh,noauto_da_alloc,barrier=0,data=writeback
<6>init: command 'exec' r=0
<4>EXT3-fs (mmcblk1p23): warning: ignoring deprecated nobh option
<3>EXT3-fs (mmcblk1p23): error: unrecognized mount option "noauto_da_alloc" or missing value
<4>EXT4-fs (mmcblk1p23): Ignoring deprecated nobh option
<6>EXT4-fs (mmcblk1p23): barriers disabled
<4>EXT4-fs (mmcblk1p23): warning: maximal mount count reached, running e2fsck is recommended
<6>omap-rproc omap-rproc.1: Loaded BIOS image ducati-m3.bin, size 5672532
<6>omap-rproc omap-rproc.1: BIOS image version is 2
<6>EXT4-fs (mmcblk1p23): mounted filesystem with writeback data mode. Opts: nobh,noauto_da_alloc,barrier=0,data=writeback
<6>init: command 'exec' r=0
<6>init: command 'exec' r=0
<6>init: command 'exec' r=0
<4>EXT3-fs (loop4): warning: ignoring deprecated nobh option
<3>EXT3-fs (loop4): error: unrecognized mount option "noauto_da_alloc" or missing value
<4>EXT4-fs (loop4): Ignoring deprecated nobh option
<4>EXT4-fs (loop4): warning: mounting unchecked fs, running e2fsck is recommended
<6>EXT4-fs (loop4): mounted filesystem without journal. Opts: nobh,noauto_da_alloc,barrier=0,data=writeback
<6>init: command 'exec' r=0
<6>init: command 'exec' r=0
<6>init: command 'exec' r=0
<4>EXT3-fs (loop5): warning: ignoring deprecated nobh option
<3>EXT3-fs (loop5): error: unrecognized mount option "noauto_da_alloc" or missing value
<4>EXT4-fs (loop5): Ignoring deprecated nobh option
<4>EXT4-fs (loop5): warning: mounting unchecked fs, running e2fsck is recommended
<6>EXT4-fs (loop5): mounted filesystem without journal. Opts: nobh,noauto_da_alloc,barrier=0,data=writeback
CPU1: Booted secondary processor
<6>init: command 'exec' r=0
<6>Switched to NOHz mode on CPU #1
<6>omap-iommu omap-iommu.0: ducati: version 2.1
<6>init: command 'exec' r=0
<6>init: command 'exec' r=0
<6>omap-rproc omap-rproc.1: remote processor ipu is now up
<6>init: processing action 0x2db08 (post-fs)
<3>rpmsg_reset_work: reseting virtio device 1
<6>rpmsg_resmgr rpmsg2: Enter rprm_remove
<4>rproc_reset_poolmem: invalid pool
<6>init: command 'mount' r=0
<6>init: command 'mount' r=0
<6>init: command 'mount' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'restorecon' r=0
<6>omap-rproc omap-rproc.1: stopped remote processor ipu
<6>omap-rproc omap-rproc.1: powering up ipu
<6>virtio_rpmsg_bus virtio2: rpmsg backend virtproc probed successfully
<6>virtio_rpmsg_bus virtio3: rpmsg backend virtproc probed successfully
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'restorecon' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'chown' r=0
<6>omap-rproc omap-rproc.1: Loaded BIOS image ducati-m3.bin, size 5672532
<6>init: command 'chmod' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>omap-rproc omap-rproc.1: BIOS image version is 2
<6>init: command 'mkdir' r=0
<6>init: processing action 0x3eed8 (post-fs)
<4>omap_hwmod: ipu: failed to hardreset
<6>omap-iommu omap-iommu.0: ducati: version 2.1
<6>init: command 'exec' r=0
<6>omap-rproc omap-rproc.1: remote processor ipu is now up
<6>omap_rpmsg_mbox_callback: received echo reply from ipu !
<6>omap_rpmsg_mbox_callback: received echo reply from ipu !
<6>omap_rpmsg_mbox_callback: received echo reply from ipu !
<6>omap_rpmsg_mbox_callback: received echo reply from ipu !
<6>virtio_rpmsg_bus virtio2: creating channel rpmsg-client-sample addr 0x32
<6>PVR: PVRCore_Init
<6>PVR: LinuxMMInit: Maximum page pool size: 10800
<6>virtio_rpmsg_bus virtio2: creating channel rpmsg-client-sample addr 0x33
<6>virtio_rpmsg_bus virtio2: creating channel rpmsg-hdmiwa addr 0x46
<6>virtio_rpmsg_bus virtio2: creating channel rpmsg-omx addr 0x3c
<6>rpmsg_omx rpmsg-omx0: new OMX connection srv channel: 1024 -> 60!
<6>PVR: PVRSRVDriverProbe(pDevice=df8aa000)
<6>PVR: SGX register base: 0x56000000
<6>PVR: SGX register size: 65535
<6>PVR: SGX IRQ: 53
<6>PVR: EnableSystemClocks: Enabling System Clocks
<6>PVR: PVRCore_Init: major device 242
<6>init: command 'insmod' r=0
<6>init: command 'insmod' r=-1
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'chmod' r=0
<6>init: command 'chown' r=0
<6>EXT4-fs (loop3): re-mounted. Opts: (null)
<6>init: command 'mount' r=0
<6>init: command 'mount' r=0
<6>init: command 'symlink' r=0
<6>init: command 'symlink' r=0
<6>init: command 'export' r=0
<6>init: command 'export' r=0
<6>init: command 'export' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>virtio_rpmsg_bus virtio3: creating channel rpmsg-omx addr 0x3c
<6>init: command 'symlink' r=-1
<6>rpmsg_omx rpmsg-omx1: new OMX connection srv channel: 1024 -> 60!
<6>init: command 'mount' r=-2
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'write' r=-2
<6>init: command 'write' r=0
<6>init: command 'write' r=0
<6>init: command 'write' r=0
<6>init: command 'write' r=0
<6>init: command 'write' r=0
<6>init: command 'write' r=-2
<6>init: command 'write' r=0
<6>init: command 'write' r=0
<6>init: command 'write' r=0
<6>init: command 'write' r=0
<6>init: command 'write' r=0
<6>init: command 'write' r=0
<6>init: command 'chown' r=-2
<6>init: command 'chown' r=0
<6>init: command 'chown' r=-2
<6>init: command 'chmod' r=-2
<6>init: command 'chmod' r=0
<6>init: command 'chmod' r=-2
<6>init: command 'chmod' r=-2
<6>init: command 'chown' r=-2
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'chown' r=-2
<6>init: command 'chmod' r=-2
<6>init: command 'mkdir' r=0
<6>init: command 'chmod' r=-2
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=-2
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'chown' r=-2
<6>init: command 'chown' r=-2
<6>init: command 'chown' r=-2
<6>init: command 'chmod' r=-2
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'chown' r=-2
<6>init: command 'chmod' r=-2
<6>init: command 'chown' r=-2
<6>init: command 'chmod' r=-2
<6>init: command 'chmod' r=-2
<6>init: command 'chown' r=-2
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'chown' r=0
<6>init: command 'chown' r=0
<6>init: command 'chown' r=-2
<6>init: command 'chown' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'chown' r=-2
<6>init: command 'chmod' r=-2
<6>init: command 'exec' r=0
<6>Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
<6>(stc): st_register(2) <6>init: command 'insmod' r=0
<6>(stc): chnl_id list empty :2 <6>(stk) : st_kim_start<6>(hci_tty): inside hci_tty_init
<6>(hci_tty): allocated 241, 0
<6>init: command 'insmod' r=0
<6>init: command 'insmod' r=-1
<6>init: command 'chown' r=-2
<6>init: command 'chmod' r=-2
<6>init: command 'setprop' r=0
<6>init: command 'setprop' r=0
<6>init: command 'mkdir' r=-2
<6>init: command 'mkdir' r=-2
<6>Compat-wireless backport release: ol_R5.SP3.01
<6>Backport based on wl12xx.git ol_R5.SP3.01
<6>init: command 'insmod' r=0
<6>Calling CRDA to update world regulatory domain
<6>init: command 'insmod' r=0
<6>init: command 'insmod' r=0
<6>wl12xx: driver version:
<6>wl12xx: compilation time: Mon Jun 10 18:19:25 2013
<6>init: command 'insmod' r=0
<6>init: command 'write' r=0
<6>(stk) :ldisc_install = 1<6>init: command 'exec' r=0
<6>init: command 'exec' r=0
<6>init: processing action 0x2de68 (post-fs-data)
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>World regulatory domain updated:
<6> (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6> (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6> (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6> (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6> (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6> (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>init: command 'restorecon' r=0
<2>EXT4-fs error (device loop4): ext4_mb_generate_buddy:736: group 2, <c>11470 blocks in bitmap, 11478 in gd
<6>init: command 'mkdir' r=0
<6>init: command 'copy' r=-1
<6>init: command 'chown' r=-2
<6>init: command 'chmod' r=-2
<6>init: command 'copy' r=-1
<6>init: command 'chown' r=-2
<6>init: command 'chmod' r=-2
<6>init: command 'write' r=-2
<6>init: command 'mkdir' r=0
<2>EXT4-fs error (device loop4): ext4_mb_generate_buddy:736: group 0, <c>31092 blocks in bitmap, 31118 in gd
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'chmod' r=-2
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: processing action 0x320f8 (post-fs-data)
<6>init: command 'chown' r=-2
<6>init: command 'chmod' r=-2
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: processing action 0x3ffe8 (post-fs-data)
<6>init: command 'copy' r=-1
<6>init: command 'chown' r=-2
<6>init: command 'chmod' r=-2
<6>init: command 'write' r=-2
<6>init: command 'mkdir' r=0
<6>init: command 'chown' r=-22
<6>init: command 'chmod' r=-22
<6>init: command 'write' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'chmod' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<2>EXT4-fs error (device loop4): ext4_mb_generate_buddy:736: group 1, <c>31104 blocks in bitmap, 31107 in gd
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'chmod' r=0
<6>init: command 'chown' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'copy' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: command 'copy' r=-1
<6>init: command 'chmod' r=-2
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'chown' r=-2
<6>init: command 'chown' r=-2
<6>init: command 'mkdir' r=0
<6>init: command 'chmod' r=0
<6>init: command 'chown' r=0
<6>init: command 'mkdir' r=0
<6>init: command 'setprop' r=0
<6>init: command 'write' r=-2
<6>init: processing action 0x49ac8 (post-fs-data)
<6>init: command 'mkdir' r=0
<6>init: command 'chown' r=0
<6>init: command 'chmod' r=0
<6>init: processing action 0x4a100 (property_service_init)
<6>init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
<6>init: command 'property_service_init' r=0
<6>init: processing action 0x4a148 (signal_init)
<6>init: command 'signal_init' r=0
<6>init: processing action 0x4a190 (check_startup)
<6>init: command 'check_startup' r=0
<6>init: processing action 0x40968 (early-boot)
<6>init: command 'setprop' r=0
<6>init: command 'setprop' r=0
<6>init: command 'setprop' r=0
<6>init: command 'setprop' r=0
<6>init: command 'setprop' r=0
<6>init: command 'setprop' r=0
<6>init: command 'setprop' r=0
<6>init: command 'setprop' r=0
<6>init: command 'setprop' r=0
<6>init: command 'setprop' r=0
<6>init: command 'chmod' r=0