Forum Post: interfacing tms320c5535azhh10 to c5535 dsp
i ordered ti dsp c5535 and i got another equipment in addition to the dsp.that is tms320c5535azhh10.i guess it is an memory extension..am i right? and please suggest me how to interface it to the...
View ArticleForum Post: RE: TMS320VC5510dsk running example project called audio
I have fixed the problem by changing the mode from simulator to JTAG.But here is the new problem.I can't hear any voice from the earphone when debugging the example project named audio.However,I can...
View ArticleForum Post: how to add a custom camera video mode into DVRRDK 4.0?
Hello,I wanna add a custom camera video mode,such as 720P30 into DVRRDK 4.0's capture link.Where do I need to modify?Are there some docs referred?
View ArticleForum Post: Use of DMA for LIDD mode of LCDC in OMAPL138
Hello All, I am trying to fetch data from DDR2 and display it on LCD panel. I have used LIDD Hitachi mode of LCDC. I have used DSP part of OMAP L138 and normal C coding for the same. As of now, ARM is...
View ArticleForum Post: RE: a strange problem
(Please visit the site to view this file)If I detect the input resolution has changed, I will call setInputResolution().Can you give some advie?Thanks very much.
View ArticleForum Post: Part No: 66AK2E05/02 Multicore DSP+ARM KeyStone II System-on-Chip...
Part No: 66AK2E05/02Multicore DSP+ARM KeyStone II System-on-Chip (SoC)What is the physical size of this SoC-?
View ArticleForum Post: RE: Program "make" is not found in PATH
Is there a resource to find the appropriate files, or should I set them manually?
View ArticleForum Post: RE: HELP: We meet some problems in AM1810 Evaluation Module...
And we also sincerely hope these posts can help AM1810 users who encounter such problems. :)
View ArticleForum Post: RE: OMAP-L138 make syslink-driver fails message:...
Hello,I apologize, the answer was just under my nose...http://processors.wiki.ti.com/index.php/MCSDK_OMAPL138_User_Guide_Chapter_Exploring#Platform_Development_Kit_.28PDK.29Please disregard this...
View ArticleForum Post: RE: OMAP3530 X-Loader Fails on DM3730
After rummaging around for a while I realised that the DM3730 is configured by testing the CPU family against the CPU_OMAP36XX macro.I think I've now got a handle on the DM3730 configuration that is...
View ArticleForum Post: Configuration of device based on am1806
Hi to everybody,i designed the device based on AM1806 processor. Device consist of AM1806 TI Sitara processor, 128MB of mDDR RAM, 8MB NOR Flash for booting, uSD/MMC card slot, OTG USB Port, and Aptina...
View ArticleForum Post: RE: DM385 Linux SATA Drvier
[quote user="Tiger Titus"]If SATA driver is not avail then this panic should not occur kw !Am i right Renjtih?[/quote]You are absolutely right. [quote user="Tiger Titus"]Suppose, DM385 SOC does not...
View ArticleForum Post: RE: problem using ndk example helloworld
Vamshi,The pre-build Hello world out file should run as it is, if you are using static IP, you should see the IP address printed in the console. If you are using DHCP, you can use Wireshark to monitor...
View ArticleForum Post: RE: DM8148 + EZSDK 5.05.02.00: DVO2 Display "glitching"
Hello Renjith,Thanks you, I'll follow up with you shortly.With regard to the scalars we're using -- we're using the DEI SC (both outputs) and SC5, as they're provided in the EZSDK OMX implementation....
View ArticleForum Post: RE: keystone PLL
Hello,Please use the equation in (SPRABL2A) --> ((pllm_val + 1) / 2) - 1.The data manual and PLL user guide will be updated to reflect this.
View ArticleForum Post: RE: configuring UART of c5515
Here i have attached the UART.C file and UART.H which has got all routines you requrired for operating c55x device up 460800 baud enjoy !(Please visit the site to view this file)(Please visit the site...
View ArticleForum Post: RE: [Urgent] Bus holder behavior
Hello Kaka-san, Below are few of the suggestions to try: 1. Can you lower the resistor value to 750 Ohms and check? 2. Also is it possible to temporarily short the XF pin to ground and then release:...
View ArticleForum Post: RE: SRIO performance
Hi Alan,Were you able to take a look at the Throughput Performance Guide that Rajasekaran mentioned in the post above? It looks like the throughput you are measuring is similar to what was achieved in...
View ArticleForum Post: Raw image Data not captured in VPIF
Hi, I would like to thank the TI E2E community for helping me understand VPIF of TI. I am trying to get the raw image data from a Omnivision sensor, Following arethe partial success achieved,a. I...
View ArticleForum Post: RE: some Multicore Navigator questions
Hi Sijomon,I am not an expert on the Multicore Navigator but I will attempt to answer some of your questions.1) To my knowledge, there is no such document. I will need to check internally. But in the...
View Article