Forum Post: RE: ezdsp VC5502 - 3204 codec problem
Hi The software available for c5502 is either the BSL package available with Spectrum Digitalhttp://support.spectrumdigital.com/boards/ezdsp5502/revc/or the CSL examples available...
View ArticleForum Post: RE: GIO_write wrong UART character sometimes
When I put breakpoint at GIO_write and did Animation, the result was worse... How should I debug it? thx
View ArticleForum Post: RE: About PIP in recording
Thanks for clarifying. I have moved this to the DM3x forum.
View ArticleForum Post: RE: Porting AM335X Starterware example code...
Dear All,I've solved this issue. It has nothing to do with the ported usb_dev_comp_mouse_ser running on C6748. The root cause is: On PC Host program the COM port name passed to CreateFile() should be...
View ArticleForum Post: Is TI have a EVM board of DM368 with OV10633 sensor ?
As titleIs TI have a EVM board of DM368 with OV10633 sensor ?
View ArticleForum Post: 6657 nand flash boot
I meet a question ,I successed in auto boot from nand flash mt29f4g08x when the .dat file length is 0x14f(it means the data length in the nand flash is 1340 bytes). but when .dat file length is...
View ArticleForum Post: RE: Cannot open /dev/video0 (No such file or directory)
Hi, i get the same problem which you have for omapl138 lcdk. Could you tell me how do you solve this problem? The following link is my problem....
View ArticleForum Post: RE: discrete sync issue in 8148
Hi Chen, We have seen that when vsync and DE mode is used for the discrete sync capture, VIP overflows when scalar is in the path. You dont use scalar in the path, but just wanted to check if this is...
View ArticleForum Post: RE: Splitting sensor image into 2 streams with DM385
Hi, I guess you want to encode different regions of the already captured image, so you could capture either from iss or vip, then extract portion of the image and encode it. Rgds,Brijesh
View ArticleForum Post: RE: DVO2 output in DM385 IPNC RDK 3.8.0
Hi Tejas, There is an Capture Display in the IPNC-RDK, just look into the rules.make file, enable this flag and recompile. I think it displays on on chip hdmi, but it is easy to change output to dvo2....
View ArticleForum Post: RE: HDMI incompatibility
Are you sure that your monitors suppors 1080p60 resolutions? 1080p60 resolution has been validated with the hdmi analyzer and we have not found any issue in the timing.Some of these monitors are hd...
View ArticleForum Post: RE: DVO2 output in IPNC RDK 3.8.0
Hi brijesh,Ya we will debug that why value is setting to 0 in SET_CONFIG , but can you still suggest that even after hard coding , the assertion in dcConfigVencMode is cleared still why we are getting...
View ArticleForum Post: RE: I2C cannot work
Zhong,Can you try to do i2c probe from u-boot prompt? Also can you check your schematics first to confirm whether you are using I2C0 or I2C1?
View ArticleForum Post: RE: Keystone II SRIO interface with Linux.
Thank you Travis for pointing out right forum and documentation. I have followed MPI_over_RIONET guide previously, actually that was only and sensible example I got. I will go through these links and...
View ArticleForum Post: Speed of vector complex multiply using Intrinsics
I am benchmarking some applications on C6678 and have written some vector math routines not provided by DSPLIB to speed up performance. One routine is a complex vector multiply. Unfortunately my code...
View ArticleForum Post: DM365 UBL_MAGIC_PLL and behavior of the PLL
I am trying to determine the behavior of the PLL when using UBL magic number UBL_MAGIC_PLL. I have modified the M and N values in the UBL descriptor, and I do see respective changes to the boot time....
View ArticleForum Post: HDVPSS driver
Hi, I am interested on updating the hdvpss driver for DM816x, currently we are using hdvpss_01_00_01_44 but I want to give it a try to a newer version to evaluate if a newer version is more stable....
View ArticleForum Post: RE: Codec interface issue with TMS320VC5416
Hello Hari prakash,Did you check all the interface level signals like BCLK, LRCK etc is that all appearing as expected ?If you have followed the details mentioned in "slaa214.pdf " it should...
View ArticleForum Post: RE: Debugging custom U-boot
The clocks on my custom design are as follows:- SYSCLK is 153.6 MHz- ARMCLK is 122.88 MHz- DDR3A and DDR3B are 100 MHz- SRIOSGMIICLK is 156.25 MHzRight now I am debugging the ethernet interface, in the...
View ArticleForum Post: Having Trouble at Cold Temperature while Using a McBSP Port...
In my application, I have one device always connected to the SPI Bus where the McBSP is the Master and an AT45DB161D Flash Memory chip is the SPI slave. This device is fairly complex and supports many...
View Article