Forum Post: Parallel Capture and Encode
Hi all,I have constructed an application with a V4L2 capture front-end (capturing from VIP0 and VIP1 in parallel). Using the capture_encode OMX example I have extended my application to pass captured...
View ArticleForum Post: RE: I2c timeout error on OMAP-L1XX
Hi Sir/Madam, Is there any means of accessing the register ICXSR and ICRSR in OMAP-L1XX.
View ArticleForum Post: RE: DM365 NAND read error
Adding some more information, below log shows nand write is fine but nand read is not working.Below log shows nand dump of write address also to confirm that nand write is working fine.DM36x EVM #...
View ArticleForum Post: RE: Encoding two 1080I_50/60 using ezsdk_dm814x-evm_5_05_01_04
Hi Margarita,Thanks for responding as this is now the critical issue for us.When considering the single instance it is working fine.With the present modification in the application we are able to...
View ArticleForum Post: Is it possible to capture four channels with 960x1080...
Hello All,As I know, the capture capability of DM8168 is two channels with 1080p/60 in the RDK3.5.Is it possible to capture four channels with 960x1080 resolution(60 freams) in VIP capture link? How...
View ArticleForum Post: RE: TMDSEVM6670L sgmii boot in uTCA chassis.
Hi.I have found the solutions.1. Link down problem with VT864 chassis.-> Let the TMDSEVM6670 RBL Etherboot with "force link" boot configuration. and Turn off the auto nego of ethernet switch port...
View ArticleForum Post: RE: McBSP - RFULL error
Where are you running Linux that affects the C6748? I assume you are not running Linux on the C6748, so this leaves me confused.Please find an example program and try to get the serial port working...
View ArticleForum Post: [OMAPL138] Problems with loading the SPI writer file on ARM core
Hi,I am still struggling with the board. Now I am trying to load the SPI writer file (spi_writer.out) on ARM core. While doing this in CCS v4, I get error:"Failed to load the program X on target Y....
View ArticleForum Post: RE: Using two EDMA3 channels simultaneously works on EVM but...
As someone working frequently with the functional simulator for c6678, I can only second this request.I've spent days trying to figure out what I did wrong when it only was a simulator bug, or...
View ArticleClik here to view.
Forum Post: HPI failed to response
I'm using FPGA to control DSP HPI interface.First, DSP is running well, I can use JTAG to debug programs.Second, all configuration were good, PCI_EN is 0, HPI 16bit.But HPI failed to response, we...
View ArticleForum Post: RE: PCIe C6678 support
Using eeprom51.bin as you have suggested works, I am able to see:$ lspci -n | grep "104c"0a:00.0 0480: 104c:b005 (rev 01)$ lspci | grep "Texas Instruments"0a:00.0 Multimedia controller: Texas...
View ArticleForum Post: RE: C6747 Floating Point Performance is the pits!
Hey guys,It looks like this issue was partially resolved after the suggestion by tsz. I took a closer look at the project and it seems the selected target got messed up somehow and we weren't getting...
View ArticleForum Post: dsp_gen_fir.
Hi:I was goint through the C implementation of the dsplib function dsp_gen_fir. I want to modify it for 40 bit accumulation instead of 32 bit.Below is a snippet from the C code. My first question is...
View ArticleForum Post: RE: c6678 about OpenMP schedule
Oh! Damn! I was so careless!Thank you so much!!!
View ArticleForum Post: RE: Would the OSD and SCD algo affects the RPE performance in DSP?
Hi Badri, Yes, you are right. I tried to disable SCD algs by set the "ALG_LINK = " in rules_c674.mk and have redo the test. Nothing was happened. The performance of my algorithm is as poor as...
View ArticleClik here to view.
Forum Post: How to understand the meaning of inbound and outbound about PCIE?
Hi everyone:Recently ,I need to use PCIE in my daily work.And I had saw some reference material.ButI cannot understand the meaning of inbound and outbound all the time.In my opinion, For the same PCIE...
View ArticleForum Post: Most urgent problem that blocked me for several days?
hi,all:help me at the post:http://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/t/304657.aspxNo response for several days .Thanks.
View ArticleClik here to view.
Forum Post: error in "VLIB_histogram_1D_Init_U8 function" of Vlib 3.0.0.7
As show in above picture, the code split the histgram into 10 bins, and each value of the binEdges array indicate the edge value of every bin; after " VLIB_histogram_1D_Init_U8" function was...
View ArticleForum Post: AVSYNC:WARNING!! Application wrongly configured displayID[-1]....
Hi When i run rdkdvr 4.0, warning appear!: AVSYNC:WARNING!! Application wrongly configured displayID[-1]. Reseting to correct displayID[0] in usecase, the code is:gVdisModuleContext.displayId[0]...
View Article