Forum Post: gstreamer v4l2 1080i60 capture problem in EZSDK05 05 02 00 : Call...
Hi,I am working on a custom DM814x board, and the video input is from a hdmi decoder, and I am using gstreamer to build my application.EZSDK version 05050200,The system can work under 1080p and 720p...
View ArticleForum Post: RE: About porting tvp514x device driver....
Hi Seung Youl Lee,I'm trying to get the tvp514x working as well, I was able to register the driver properly in the kernel and I already verified that the chip is working reading its registers by i2c....
View ArticleForum Post: RE: Regarding Control info De multiplexing over PUSCH .
Hi Naveen,The BCP Rate dematcher does provide CQI output packet when the size of the CQI Payload is greater than 11. We'll need the following memory dumps in order to be able to look into this issue.1....
View ArticleForum Post: What are the basic CFG File and Modules Needed for NDK Stack and...
I don't understand the CFG files and required modules well. What are the required components to build a project to do the following?1) create the NDK stack for TCP/IP packet sending over...
View ArticleForum Post: RE: DVR-RDK 3.5 encode jpeg
Hi Badri, I have difficult getting the YUV frame in DVR RDK, and I hope I can get the YUV frame between H264 video decoder & display steps. I am using the McFW "H264 file ------>...
View ArticleClik here to view.
Forum Post: RE: DM814x/DM816x interface to monochrome CCD Sensor
Hello Hardik,Thanks for your inputs.I am happy, that I get a monochrome frame with only one generated plane in the memory from the FVID2 object (I don't have display functionality). But one think is...
View ArticleForum Post: RE: Uart behaviour after recovering from timeout error
Romain,You are exactly fine with my understanding.Try adjusting your time out period (high/low) to avoid block on the second call. Please try to choose an optimum timeout which would help out to stay...
View ArticleForum Post: RE: C6678 boot through SRIO
Rahul,Thanks for your answer.I'm very interested in the modification of the example to boot from port 1. As I wrote before, I tried it without success.Thanks,JP
View ArticleForum Post: RE: C665x ADC connection via uPP
Hi Daisuke,I don't have any examples of an ADC connected directly to a uPP interface. After looking at the interface for the ADS8471 I'm not sure it's the best candidate. You should be looking for an...
View ArticleForum Post: RE: How to Use 6678 eth0 and eth1 with different MAC simultaneously
Senthil,I just checked and the current effort underway is to make the needed modifications to NIMU to support one NDK running on a single core, but using both ethernet ports simultaneously. Each port...
View ArticleForum Post: RE: Problems using dlms() function of dsplib
Thanks a lot for your answer Dear Mukul,We tried this version and the problem when running the code from flash (standalone) is solved.We have one additional question. We are using the DLMS function in...
View ArticleForum Post: RE: StarterWare SD Card driver
I've posted the code is a new thread here:http://e2e.ti.com/support/embedded/starterware/f/790/t/283373.aspx
View ArticleForum Post: RE: slices output on Ezsdk
I found the answer. When changing to encodingPreset = XDM_USER_DEFINED, one needs to also set some other parameters or it will complain about bad parameters....
View ArticleForum Post: RE: MDIO USERACCESS1 Interrupt on the C6670 seems to trigger...
Has anyone had a chance to look into this?I have a workaround (use CSL_MDIO_isMaskedUserCmdCompleteIntSet() inside the ISR to see if interrupt is real) at the moment, but am hoping to get this software...
View ArticleForum Post: CCS support for OMAP2430 on Windows 8 ???
I have a customer with the following question about an older OMAP processor, can someone help? Thank you!We have recently upgraded our computers and have run into an unexpected issue. It seems that...
View ArticleForum Post: RE: Power Down of 88E1111 PHY causes MDIO interface loss in C6670...
1) I will see what I can do about getting support from Marvell on this item.2) By looking at the MDIO register range (0x2090300) in the memory browser, it does appear that the MDIO interface is still...
View ArticleForum Post: omap l138 sata dma engine startup problem
I'm running vxWorks on a custom l138 board design based closely to the LogicPD eval board. My code and drivers initialize a SATA drive with no problems using the eval board but the same drive and...
View ArticleForum Post: Copy data from memory in C6748 McASP example, need help
Hi Everybody: In LCDK C6748 McASP example, I try get the receive buffer pointer in the memory using following code, while(1) { if(lastFullRxBuf != lastSentTxBuf) { /*...
View ArticleForum Post: RE: DM365 vs. DM368 Production life
Performance is not critical. Any speed-grade will work.-Jaden
View Article