Forum Post: DDR3 Memory Controller Registers Settings
Hi All,We are checking the DDR3 memory controller register settings for our application and currently we used the same settings as Mistral EVM board.For our applications, we are running 400MHz clocks...
View ArticleForum Post: Dynamic Voltage Frequency Scaling (DVFS)
Hi all,Now we are using DM8148 platform with ARM 720MHz, DSP 500MHz speed chip and CVDD_DSP, CVDD_ARM, CVDD_HDVICP, CVDD_CORE will use 1.2Vdc. If we use DM8148 chip with ARM 1000MHz, DSP 750MHz speed,...
View ArticleForum Post: DM3730 H264 Encoder @50fps
Hello, I'm working on DM3730 platform, is it possible for DM3730 h264 encoding QVGA(320*240) image @50fps? Thanks
View ArticleForum Post: RE: flashing xload to nand flash from uboot
Hi,these days i tried a lot to flashing the xload to nand,the stepis as the same as i firstly mentioned,and that's correct.I add some messages in the xload,it seems works correct.but,the other problem...
View ArticleForum Post: OMAP-L137 Audio driver
Hi,I am a beginner in using OMAP-L137 EVM. I want to write a code in c to work with on-board audio codec. Where can I find the driver functions (driver .h files)?I would be very thankful if someone can...
View ArticleForum Post: RE: pipeline freeing after certain period in dm368 leopardboard
Can u post your pipline here?
View ArticleForum Post: DM368 PRTCSS Current
What the current consumption for the PRTCSS (RTC mode for time tracking) of the DM368?
View ArticleForum Post: RE: C6746 SPI0 Clock flickers when writing to SPI Pin Control...
No idea why SPI_CLK would glitch. Maybe pinmux the pin to SPI_CLK after SPI config. Leave the pin as a high impedance or GPIO output before SPI config.
View ArticleForum Post: Demo code of dvsdk not working....
Hi,I just tried to compile the demo code provided in the dvsdk pack available with DaVinci DM6437. But the code ain't compiling as it's not picking the file saying, "cannot opennetmain.h." Now i've set...
View ArticleForum Post: RE: dsplink, lpm and cmem modules
I'm getting the same issue when I tried to compile Codec Engine## clv5T package/package_ti.sdo.ce.examples.extensions.scale.c .../usr/local/xtools/arm-none-linux-gnueabi/bin/arm-linux-gcc -c -MD -MF...
View ArticleForum Post: RE: Keystone Maximum Power Draw Test
Hello,All Chad's point is valid.I just want to add: Linpack is a good candidate to run on all cores and make it as loaded as possible. You can download one example here for Keystone I...
View ArticleForum Post: Info regarding peripherals usage....
Hi,I want to know if there's any sample example or code available if you can send the encoded output and receive it on DaVinci DM6437 using any of these peripherals???1. LAN2. CAN3. Serial Port
View ArticleForum Post: RE: romparse on large files
Hello,You can find romparse source code here: (_2_01_02_06 can be replaced with the version on your hd):C:\ti\mcsdk_2_01_02_06\tools\boot_loader\ibl\src\util\romparseI'd suggest you look at the error...
View ArticleForum Post: dpll1_ck could not enable -22
We are using a CM-T3730 with Linux kernel 3.0.50. We have recently noticed dpll1_ck "could not enable: -22" errors with very slow application times. (see arch/arm/mach-omap2/clock.c)We can "fix" the...
View ArticleForum Post: RE: eZdsp 5502: test code for packet transmission
Mark, thanks for your reply.Yes, I did it even before I could at last found the needed .exe on the CD.I understand they sell their TCP/IP stack, but would it be possible to ask them to open source the...
View ArticleForum Post: C6713 DSP - Pitchshifter DSPLIB-FFT
hello, I`m doing a Pitchshift program using the C6713 board and I am in a dead point.When I`m writting the C echivalent code for the FFT functions from the DSPLIB/support in the main.c the program...
View ArticleForum Post: RE: Detecting 6657 EVM (TMDS6657) with AMC to PCIe adapter using...
Claude,The older IBL with FPGA was a patch solution. Multiple changes were made to the FPGA/IBL/MCSDK while transitioning from pre-production to production. Reverting back may uncover issues and...
View ArticleForum Post: RE: Problem wiht NDK transport HD video over 50Mbps
The NDK probably can achieve 600-700 Mbps throughput on UDP packets. If your "VLC streaming provides a variable bit rate so hte average 50Mbps may reach 200mbps at one time", why you expect to achieve...
View ArticleForum Post: RE: USB and LAN developments using SYSBIOS
Monsef,I have moved this thread over to the device forum in hopes that it will get a faster response there.
View ArticleForum Post: RE: Performance considerations, DSP
Hi Sivaraj K.Thanks for your explanation most of that am I aware of. You might have some point on the ASM step and the DSP cycle some of the instructions takes up more cycles. To eliminate all the...
View Article