Forum Post: RE: question about capture PAL on 8168
You are connecting capture output directly to encoder. DVRRDK 3.0 encoder doesn't support interlaced (field picture) encode. You will have to add DEI after capture to make progressive frame for...
View ArticleForum Post: Some questions about DM3730 PoP Packaging
Hello,I am using a beagleboard xM, I just have read the SCH and found that the pins of SDRCs and GPMCs are leaving without connecting. GPMCs have no connecting because there is no nandflash, and SDRCs...
View ArticleForum Post: RE: DM8168 DVRRDK 3.5 encoder stuck after ~10 frames
XDM_INSUFFICIENTDATA error indicates issue with application feeding incomplete frame to decoder for decoding. I don't see how it is related to Scaler/nsf links which come into picture after decoding....
View ArticleForum Post: RE: system_dctrl.c: dctrlTriDisplayConfig != NULL : failed !!!
Only VPS_DC_VENC_HDMI | VPS_DC_VENC_HDCOMP (HDMI tied with HDCOMP) and VPS_DC_VENC_DVO2 | VPS_DC_VENC_HDCOMP (DVO2 tied with HDCOMP)tied venc configuration mesh is predefined in DVRRDK system_dctrl.c....
View ArticleForum Post: error on "build MAD image"
Hello. I tried to make MAD image with sample that is "image_processing".But I met an error. So I ask you to help. I used compiler ver7.4.4 (C:\ti\ccsv5\tools\compiler\c6000_7.4.4)And I use...
View ArticleForum Post: RE: Cannot unzip sprc941a.gz
Hi,Sorry, It seems to be issue while compressing the files.1) PFA of PRU package for linux format.Use to uncompress "tar -zxvf PRU_Software_Development_1_03.tar.gz"(Please visit the site to view this...
View ArticleForum Post: RE: dsplib_c674x_3_2_0_1 FFT_Example_674_LE_COFF fails to compile
Hi,[quote]Are the DSPF_sp_mat_mul_gemm, DSPF_sp_mat_mul_gemm_cplx, DSP_fir_r8_h16, DSP_fir_r8_h24 and DSP_fir_r8_h8 functions supported on a c674x device?[/quote]In my understanding, Of course It...
View ArticleForum Post: RE: error message
You can use dis470 under cgt_m3\cgt470_4_9_5\bin to get disassembly.
View ArticleForum Post: RE: Help with GPIO
Hi Miguel,In my first post, I have already answered this question like which example you can refer to as well as the name of the package.By any chance you looked into the following which I referred to...
View ArticleForum Post: RE: UART with auto flow for omapl138evm
Hi,[quote]PINMUX0 = 0x44000000; //Selects Function UART2_RTS and UART2_CTSPINMUX4 = 0x00220000; //Selects Function UART2_TXD and UART2_RXDI am not changing PUPD_SEL,PUPD_ENA are using default...
View ArticleForum Post: HDMI video in - scale - encode - WiFi transmit
Hello,I want to built a working device prototype, that can take in HDMI output from video camera/DSLR (no HDCP involved here and just video stream is important). Then scale it to 720p24 (or little-bit...
View ArticleForum Post: RE: Run of the demo facedetect on the LCDK C6748
Hi,[quote]I would modify the could ans add some additional functio to face detect demo and run it into the board[/quote]It depends that what did you modify.Please refer the following ti e2e thread...
View ArticleForum Post: RE: Problem with NFS on host Ubuntu 12.04, L138 LCDK board
Hi,Your boot arguments seems to good.Try the following linux commands on your ubuntu host machine (192.168.0.103) for exporting your fs.sudo ufw disablesudo exportfs -ravsudo exportfsAfter executing...
View ArticleForum Post: RE: sRIO Latency time
Hi Kenshow,One possibility that you get two different latency is because of cache impact. If the data sent from DSP is already in L1/L2 cache, the latency would be lower. You may try to disable...
View ArticleForum Post: RE: Failed to add drivers MT9T031 in the OMAPL138？
Hi,[quote] First my board is OMAPL138 LogicPD EVM and i don't have the UI board,i modified the board file is the board-da850-evm. and the vpif_capture.c files .i only add some printf...
View ArticleForum Post: RE: EVM6678does not power-up with KONTRON AM4910 MCH
Hi Bill and Brandy,Kontron does not give anything except for url to the latest f/w update. This does not help. They do not reply and are not intended to provide any help or fix. Terrible company and...
View ArticleForum Post: RE: Change Omx_h264enc bitrate during runtime
Hi David,That was my mistake. I added that entry in GstOmxH264Enc. I am interested in other errors.
View ArticleForum Post: RE: gstreamer caps in client always shows framerate as 25.
Hi David, 1) Could you share the pipeline that you are using? gst-launch omx_camera output-buffers=10 ! "video/x-raw-yuv, format=(fourcc)NV12, width=1920, height=1080, framerate=60/1,...
View ArticleForum Post: DM368 capture from TVP5158 line-mux mode - missing super-frames?
Hi,We are trying to capture video from TVP5158 with DM368 VPFE. The format is 8-bit BT656 two channels D1 line-muxed at 54 Mhz. The DM368 is working in full capacity 432 Mhz ; DDR 340 Mhz ; VPSS 340...
View Article