Forum Post: RE: BeagleBoard-xM and LI-LBCM5M1 Camera Board
I added board-omap3beagle-camera.c file and modifi board-omap3beagle.cBut file /dev/media0 didn't create.and no output after command:dmesg |grep mt9p031Why camera didn't...
View ArticleForum Post: RE: Connect general purpose ADCs to the OMAP L137
Thank you very much for your answer. It has been really helpful. In the case of this post they are connecting the McASP to the serial interface of the ADS8556 ( which has a special signal for the...
View ArticleForum Post: RE: dvr_rdk SharedRegion_isCacheEnabled issue
Hi BadriVery happy see your reply, thanks you!1. I use TMS320DM8148BCYEA0, PG2.12. Yes, I often see VIP overflow message when start run the usecase, But when I stop video device, I don't see VIP...
View ArticleForum Post: RE: OMAP L138 OV5640 CAMERA
Hello,I am also working on raw capture with OMAP-L138 LCDK and LI-M024 DUAL (Aptina sensor). I am having some issues with i2c communication several days now.More precisely ,I am trying to modify the...
View ArticleForum Post: RE: Cannot ping C6678
Hi Can anyone look into this problem and suggest me what to do?Thanks
View ArticleForum Post: NDK hello world program not working
hi I am using NDK 2.21.0.31 with mcsdk 2.01.02.06 & bios_6_33_06_50 CCS 5.2i am using PDK example for receiving UDP packets on TMS320C6678 based custom board after running the program i am...
View ArticleClik here to view.
Forum Post: omx_noisefilter corrupts output frames
I'm using a pipeline that is intended to simulate dual video capture, mix the two streams into a single picture-in-picture, then write the result to a file. For now, instead of capturing two streams,...
View ArticleForum Post: RE: Booting from eMMC or SATA SSD
Hi,I should check myself before asking. It seems there is no implementation for DM814x SATA in the u-boot.Is TI going to add support SATA in the u-boot?Thanks,Andrei
View ArticleForum Post: RE: usbhostmsc-uart program problem
Hi,I still do not fix the problem to merge the usbhost into uart program. Have you had the chance to see the programs?I have a question, is there any library of the usb program which affects to the...
View ArticleForum Post: Questions about implementing local reset across PCIe bus (C6670)
Hi,In the C6670 data manual (SPRS689D), the description for the BOOT_ADDR is in Table 3-2 Device State Control Registers. There are no details about whether this register is readable. The table entry...
View ArticleForum Post: Linux support for AM3874/DM8148 in Arago linux-omap3
I'm trying to get Linux working on an AM3874 board. I've started with the linux-omap3 tree from arago-project.org:git://arago-project.org/git/projects/linux-omap3.gitNow, I've almost got the kernel...
View ArticleForum Post: DM365 Qt and video playback color matching
Hi everyone,I've written an application to display images on the screen using Qt, and play videos using the decode demo program. Everything is working well, except for a slight difference in color...
View ArticleForum Post: RE: NOR flash RY/BY signal and EMA_WAIT(0) - does this need to be...
I would say it is optional. Additionally the on chip ROM boot loader for NOR boot mode, also does not use EMA_WAIT signal.
View ArticleForum Post: RE: AM1808 Underclocking
In general apart from USB and DDR , both of which have the min frequency limitations noted in the datasheet, I do not think there is a minimum "internal" frequency limit for other peripherals and CPU....
View ArticleForum Post: RE: Linux support for AM3874/DM8148 in Arago linux-omap3
Hi Pavel,Thanks for the quick response -- I'll diff my kernel snapshot with the PSP version to determine what's different, and go from there.Treating the SPI issue specifically, however, I see that the...
View ArticleClik here to view.
Forum Post: About UPP of OMAPL138
Hi: As picture described ,each UPPperipheral I/Ochannel has a 512 byte FIFO,When in transmit mode ,Transimssion will not begin until the channel has loaded enough data to fill at least one...
View ArticleForum Post: RE: Look for component 480P display setting.
Have you changed VMOD.TVTYP to 525P, and proper timing parameters (Table 3 of sprufg9c)?
View ArticleForum Post: RE: CSL_tscRead() function returns incorrect value
Hi,I don't know why you're getting such a huge value, but this example you gave is close to 2^64, maybe this means something. If you do 2^64 - 18446744072116738712 you get 1592812904, @ 1GHz gives...
View ArticleForum Post: RE: OMAP-L137 EVM: Unable to mount root fs on unknown-block(31:2)
Hi Rajasekaran,I haven't figured out my problem yet, but some links you provide are very useful for new comers like me. I need to read them carefully and follow those instructions strictly to avoid...
View ArticleForum Post: RE: How to use the internal On-Chip ROM of c5515
you document gives just a brief overview of the boot loader how coud i make use of apis present in that are they of internal usage ? or users are restricted why there is no document or user manual...
View Article