Forum Post: RE: DVRRDK,can not display(dec_dis,cap_dis,'every'_dis),anybody...
Hi,badriI have tested HD COMP output interface,it does not working,too.I use a YPBPR HDTV ,and connect to TI 8168EVM board,the TV reports "NO input signal" .What wrong with the evm board or...
View ArticleForum Post: TW9910: missing soc-camera data!
Hi On my 138 board, I using TW9910 Chip. But when kernel load, there is error:TW9910: missing soc-camera data!tw9910: probe of 1-0045 failed with error -22i2c i2c-1: Failed to register i2c client...
View ArticleForum Post: RE: Loading an OpenMP or a multicore program on TMS320C6670's...
Hi Rahul,Is there any example of a multicore boot program for NOR or NAND? I have got the idea of SRIO hello world program but I can't use SRIO boot for my application. Can you please elaborate on what...
View ArticleForum Post: RE: How to attach open cv library files in omap l138 lcdk
I have seen this link http://processors.wiki.ti.com/index.php/Building_OpenCV_for_ARM_Cortex-A8 .. in this link for building open cv library files in the starting there is a command sudo apt-get...
View ArticleForum Post: RE: Changing usbstk5505bsl memory model to huge
You need to rebuild the board support library.Can download BSL from Spectrum...
View ArticleForum Post: RE: DM8148 MCFW: mosaic link picture in picture mode
and is display layout can be changed dynamically on the run-time, without stop video pipe?
View ArticleForum Post: RE: Booting from USB port for C5535
We also have a need to boot the C5535 over USB. Our development environment and OS on the target board are both Linux. I have been looking for details of the USB bootloader on either the host or...
View ArticleForum Post: RE: Keystone K2H
Tushar,Yes, you can access the NETCP registers through ARM.Go through the device datasheet and EVM TRM for ARM based Memory mapped address to the particular module.You can use that particular register...
View ArticleForum Post: RE: sendto drops packets on udp stream
Senthil,We noticed similar kind of issue in the past, and also thanks to Ralf for your notification on this issue. Find the similar E2E...
View ArticleForum Post: RE: c6748, NDK, FLASH, BIOS6
Hi Gaby,as you have seen from my previous posts, I have been working this issue for months- I do not believe that TI has looked into this issue as I have provided to following without any satisfactory...
View ArticleForum Post: RE: How to call MessageQ_count by slave cores?
Hi,Please have a look at the IPC user guide, find the details for how to use the messageQ.http://processors.wiki.ti.com/index.php/IPC_Users_Guide/MessageQ_ModuleThe IPC module have the reader and the...
View ArticleForum Post: CCS 5.4 on Windows 8 for the TMS320C6416
Hi!I try a new target configuration file for the TMS320C 6416T in CCS 5.4 on Window 8. I choose theXDS510USB as Emulator, but I get an emulator initialization error. Can anyone tell me what to choose...
View ArticleForum Post: RE: Capture video in NV12 format in EZSDK 5_05_02_00
Hi again,Another question.We use the 2nd VIP port and configure it as a 16bit capture mode. Does it matter which VIP port to use, or using 8bit/16bit mode?
View ArticleForum Post: RE: C6657 power supply design considerations for PCIe with a PC...
Hi Daisuke,The PCIE interface for the C6657 is not designed for hot-swap operation where the signal is driven from one side before the power is present to the SOC. We have seen boards designed for the...
View ArticleForum Post: RE: 66AK2H MSMC MPAX register access
RY,You could potentially get into issues if just using NWrite packets since the memory writes will be different paths than the register writes. What I mean is that if the write transactions are loaded...
View ArticleForum Post: RE: Dual port ethernet troubles
The problem is not that eth1 is not enabled. It shows a MAC and an IP address that was given to in from DHCP. The problem is eth1 can reveive frames through eth0. Also when I ping from my PC eth1 it...
View ArticleForum Post: RE: EVMK2H u-boot from MSMC RAM with CCS fails
Rajasekaran,The EVM has never failed to boot from SPI NOR (i.e., without using the emulator). However it also never gives a name for the SO-DIMM.When I remove the SO-DIMM, I get an error and it...
View ArticleForum Post: RE: Keystone2 MCSDK kernel configuration using arargo/yocto
Rajasekaran,Thank you again for help. This is not an urgent matter at this point since I am relatively early in my development. Eventually it will become more important and maybe the documentation will...
View ArticleForum Post: RE: No UI folder in VayavyaLabs GUI release package
Thank for your reply.After I restart computer, the problem disappears.Now I'm trying to add my function on GUI. I added one event (this.attachEvent) in liveview.js. The event handler function is only...
View Article