Hi Gaby,
as you have seen from my previous posts, I have been working this issue for months- I do not believe that TI has looked into this issue as I have provided to following without any satisfactory answer:
-Source code of an LCD / NDK project that fails
-Emulator diagnostics that show configurations used (Especially the PSC registers and memory setup)
-Binary outputs from my code and the AISgen-erated binary to be used with the SPIWriter to FLASH the NAND
-Pictures of the AISGen configurations
-Description of my workaround regarding PSC1 which appears to not be turning on the EMAC under FLASH boot configurations coming from AISGen. My work around will get your code to work- take a look at it, I think that is all you're going to be getting from TI ...
Good luck!
Re,
Mark