Forum Post: syslink sample error on the OMAPL138-LCDK
Hi, I have a OMAPL138-LCDK,and I'm working with syslink-examples to test the correspondence between core ARM and DSP.I got error as follow:root@omapl138-lcdk:/ti/syslink-examples/OMAPL1XX/messageq#...
View ArticleForum Post: RE: TMDXLCDK138 OMAP L138 LCDK kit
Hi,You can get all the technical docs & s/w (Which includes schematics, TRM, data sheet etc.,) for OMAPL138 LCDK from the following...
View ArticleForum Post: RE: What is CTRLR.CLKFACK bit in C5535 USB Controller?
Hello J-breeze,This register bit in the USB Control register allows for fast responding to the clock stop request. If this bit is enabled, this module will return a clock stop ack in the next clock...
View ArticleForum Post: RE: SRIO - Port error interrupt clearing sequence
Hi Ryan,When posts are marked answered, it is better to start a new post with your question. When you repost your question, please be specific about an example you are looking for. Are you looking...
View ArticleForum Post: RE: DM8148 DSP - DSP DDR performance issue
Pavel,If you will go to the end of the mentioned tread you will see the customer statement - "The simple answer is, thats just how long it takes....live with it. ;)" which probably TI can supply the...
View ArticleForum Post: RE: ezDSP C5515 USB transmission problem
What USB host driver are you using?Regards.
View ArticleForum Post: RE: How to configure for 375/456 Mhz for OMAPL138 ?
Hi Titus,How to probe the frequencies on the Logic PD Evaluation board of OMAPL13x , as there is no documentation regarding this ?
View ArticleForum Post: RE: SRIO doorbell Response Timeout(Completion Code==3)
Just saw this now, is the issue resolved? Is there a direct connect between DSP and FPGA or is there a switch involved? Can you successfully do NREAD operations from the DSP?Regards,Travis
View ArticleForum Post: RE: unable to connect c5535 ezdsp kit to the computer
Have you tried running the test code in Spectrum Digital's support web site with the GEL file provided?http://support.spectrumdigital.com/boards/ezdsp5535/revc/Regards.
View ArticleForum Post: RE: 6678 I2C EEPROM programming procedure for new / custom board
Hi Jeff,1) Yes, the GEL files and docs for this are in the MCSDK. You will find the GEL file for evmc6678l in C:\ti\mcsdk_2_01_02_06\tools\program_evm\gel and the docs for programming I2C EEPROM in...
View ArticleForum Post: Spectrum Analyzing system
I am engaged in a research and in need to create a Spectrum Analyzing system with frequencies of 2ghz to 3ghz.Which DSP is most suited?Best Regards,João Luiz D. H. valença
View ArticleForum Post: RE: DM8148 - NAND Flash memory configuration
Hi Shiou Mei,I assume that I will need three CS as the max CS size is 256MB and I want to use 512MB NAND Flash, one of the option's I was thinking is to define one CS for the first 256MB than the...
View ArticleForum Post: PCIE error "Error in Reading the FPGA_ICS_557_OFFSET" whit C6678
Hello,I'm using PCIe interface of C6678 DSP , for communication between two DSP "RC to EP" whit the CI2EVM_BoC dual evm interface card, but I have this problem. Error in Reading the...
View ArticleForum Post: RE: DM385 Kit - Error on attaching to HOST
Another information;Using: SysLink 2.20.02.20
View ArticleForum Post: RE: c6678 EMIF16 boot qusention
Hi Jeff,The method you've described has been used by other customers. Since the difference between no boot and I2C bit is a single bit, it is pretty easy to have the tester drive the part into no boot...
View ArticleForum Post: RE: DDR3 ECC
Hi Avinash,In order for the the ECC to operate correctly, you must write 0x0 to every location in the memory before you enable ECC operation. If you don't zero out the memory than the ECC controller...
View ArticleForum Post: RE: OMAPL138 assembly FIR filter works great in debug, but breaks...
***UpdateI might also add the when digging through the optimized assembly, if ever the SPLOOP instruction is found (for using the pipeline) my code simply will not run in real-time.
View ArticleForum Post: RE: Code Composer Studio (CCS) 5.4 corruption causes out of...
I have more information to offer on this issue.I commented out all the code in my main.c file and added a simple line --> puts("\nHello World");After cleaning the project, I built the project and...
View Article