Forum Post: Can gamma correction work for TVP5150 on dm368?
If you know plz tell me more.regardsyangchar
View ArticleForum Post: RE: Audio decode and Playback tvp5158
Hi,I am using decode audio from audio file test case and add playback support in decode audio demo function but i can't hear any sound on hdmi or AIC.Here is my modified code. Yellow background is new...
View ArticleForum Post: Is DM648 EVM kit still available for order?
I placed order DM648 EVM development kit from Digikey 2 weeks ago. At the time of placing the order, it was back-ordered and mentioned the estimated shipping date is 12/17. However, I haven't got any...
View ArticleForum Post: RE: Query related to DSP TMS320C6746 internal memory
Hi Mukul and Pubesh,Thanks for yor reply.I read ,and i conclude that,1) If i have to use 256KB L2 RAM for HPI,then master host have to write in address range 0x1180 0000 0x1183 FFFF.2) And our CPU DSP...
View ArticleClik here to view.
Forum Post: [Urgent] Confirm the XF pin behavior
Hi,Please let me confirm the following questions.1. What kinds of XF pin status is assumed when perform the reset to C5535/C5515 or the POWERGOOD signal is "Low"?i.e. I would like to know whether XF...
View ArticleClik here to view.
Forum Post: [Urgent] Bus holder behavior
Hi,Please let me confirm the following question.[Question]What pull-down resister values should we use for the pin which has bus holder function in order to change the status from "H" to "L" in view...
View ArticleForum Post: [Urgent] Appear the unintended voltage on ANA_LDO
Hi,Please provide your advices to us.[Phenomenon]Appear the unintended voltage(Approximately 0.4V) on ANA_LDO during RTC-only mode.I summarized this phenomenon to Power point file.Please check this...
View ArticleForum Post: about dm8168 dvr4.01 I2C problem
there are two I2C chips on our customer board,one is pca9555(i2c 7-bit dev address:0x26),the other is adv7441(one 7-bit dev address is 0x20).when we write pca9555 reg0x03,adv7441(dev address 0x20)...
View ArticleForum Post: how to set the window's fill color in SWMS?
Hi, I'm using RDK4.0 on DM8168. The link path in my project is DEC->SWMS->DISPLAY. I found that when there is no data for a specific window in SWMS, the window would be displayed as a grey...
View ArticleForum Post: RE: network speed
Sorry I'm not cache expert and I would have to find out the answer For documentation copy xdctools.chm locally and try to open it will show links.
View ArticleForum Post: RE: C6678 EVM Ethernet Boot
Hi Murad,IBL supports three I2C boot modes: NOR boot, NAND boot and EMAC boot. Both NOR boot and NAND boot support maximum 2 images, EMAC boot supports only 1 image. For all the I2C boot modes, user...
View ArticleClik here to view.
Forum Post: How to skip error chrom data Frame?
When I run DVRRDK 4.0, I can get frame data. But sometimes, I found that there is some frame that chrom data is wrong. such as:Is it can skip? or is there some method to check chrom data is ok?Thanks...
View ArticleForum Post: Problem with USB on OMAP-L137
Dear all,I have a problem with USB on OMAP-L137. I inserted a disk in USB connector and then power on the board. When the Linux are booting it printsusb 1-1: new full speed USB device using ohci and...
View ArticleClik here to view.
Forum Post: RE: About EMI Filter for C6713 PLL
Hi,TI recommended EMI filter manufacturer at the datasheet. You can find the DSK6713 schematic for EMI filter design.
View ArticleForum Post: RE: unsresolved symbol while linking assembly files
http://processors.wiki.ti.com/index.php/C6000_EABI_Migration
View ArticleForum Post: RE: Strange behavior in nor flash boot
A suggestion. After NOR boot, connect with the emulator without loading an image. See what the ROM bootloader put in DDR. I've never gotten CCSv5 to connect without loading an image. So I can't say how...
View ArticleForum Post: RE: SD/MMC more than 2 GB
I think MontaVista 5.0 is based upon a very old 2.6.18 kernel. That patch appears to be from a non-TI person from long ago on an older version of the E2E forum. The old post has probably moved to a new...
View ArticleForum Post: RE: Is it possible to bring decodr output on A8 using ipcBits stream
Hi Badari,With this change and memory map changes we could do video over video blending with 720p resolution video but the quality is very poor and the CPU utilization on A8 also gets increased.Thanks...
View ArticleForum Post: RE: Linux-c6x and TMDSEVM6472
At the moment I have the following:1. In the folder /linux-c6x-2.0.0.63/linux-c6x-project executed command./prj configreceived file/linux-c6x-2.0.0.63/linux-c6x-project/setenv2. Edited file...
View Article