Forum Post: RE: RDK 4.0 Memory Map
OK，we will be tring above things.And We still have a problem:We should still use link/chain api in DVRRDK 4.0,or migrate to McFw API?Attachment file is our user case.(Please visit the site to view this...
View ArticleForum Post: RE: dm8168 memory map
Please check the LISA mapping. It should tell which region is falling on which EMIF section.RegardsRajat
View ArticleForum Post: RE: DM8148 with dvr-rdk 3.5
According to TI, these errors are normal, and are output while the DSP is waiting for the M3 processor to set up the shared memory region....
View ArticleForum Post: Disabling and re-enabling an OMX input port
Hi,I'm trying to reconfigure the OMX DEI input port to use a different stride whilst the app is running. I am disabling the input port, changing the settings on it, then re-enabling it. Disabling it...
View ArticleForum Post: Location of sample HDMI CEC application in DM8168 PSP?
Hello all!My goal: Play around with sending and receiving CEC on the HDMI output from the DM8168.My hardware: DM8168 EVM from Spectrum Digital. (It says "816X/389X EVM, ASSY 512870, REV G".)My...
View ArticleForum Post: OMAPL-138 to FPGA Set Up and Hold EMIF Clocks
My customer has posed the following question:This relates to interfacing TI DSPs to FPGAs using EMIF. We've done this a LOT in the past. Specifically, we've hooked up Altera Cyclone III, IV, V, Arria...
View ArticleForum Post: RE: McBSP example on LCDK C6748 fails.
Onur, How did you change the drivers? I tried removing references to RM from the linked libraries and just got linker errors. From reading the docs included with the driver it appears that the RM is...
View ArticleForum Post: RE: OMAPL138 development board setup
Hi Rajasekaran,highly appreciate your prompt response and the very helpful info.so what i need to do is to re-build U-Boot to enable support for NAND. right? re-build from the original UImage i got...
View ArticleForum Post: RE: DM8148 pin drive current
Hi Rajat,Thank you for your confirmation.I'll work with my hardware team then.RegardsMay
View ArticleForum Post: RE: SOC issue
Hi Rajat:This issue has been solved.Anyway, I appreciate your answer and help.Best regards,Marcus
View ArticleForum Post: RE: NDK on DM643x Compliance Testing gives FCS error
Hi Prad1,I'm not the author of that driver but I'll try to help.[quote user="Prad1"]why is this if condition checking for packets <60 why not 64?[/quote]I would guess that the driver is checking for...
View ArticleForum Post: RE: OMAP-L138 eMMC or Sdcard/MMC ?
Can someone please address the rest of our concerns? We need to make a decision in the short term.Thank you very much,Arya B.
View ArticleForum Post: RE: How to scalar yuv420 image to yuv420 image?
Hi Ram, Thank you for your reply. Can you tell me how to use 8 channel?The resized type of per channel is different.Is it ok?
View ArticleForum Post: the selection of J-TAG type
Hi,all, we designed our custom board with the tms320c6678, our first version used the 60-pin J-TAG which is in accordance with the 6678evm board. Now we start to design the second version.It is...
View ArticleForum Post: RE: 8168 how to read the VBITS_HDR_0_LAYER_0.bin file
Thanks ,I want to know if i can extract one frame data from this file? what is the struct of data in this file(VBITS_HDR_0_LAYER_0.bin)
View ArticleForum Post: How to get rid of the "fade in" of PA/F on DA830?
I am now running the PA/F I12 topology under Linux on the ARM of DA830. I have used execPAIInRingIO and execPAIOutAnalog, and I have sent writeVOLControlMasterN(0) and writePCMRampDisable. However I...
View ArticleForum Post: RE: Using VPDMA to show uboot lcd logo, but limited by time
Hi Pavel,As far as I know, in the M3 vps source codes, there is a vpdma firmware loaded like in uboot. And I know that if we want to stop vpdma send, we can write (1 << 20) to VPDMA_LIST_ATTR...
View ArticleForum Post: RE: How to run a video capture demo on DM8127 with IPNC_RDK3.5
Hi Rajat. Thanks for your reply. The 16bits data bus is connect to VIN_0 port. so I should attach the camera to (VIP)HDVPSS?Regards bu
View ArticleForum Post: RE: Cannot run DVRRDK4.0 VDEC + VDIS demo on custom DM8168 board
hi,I meet the same problem .Hope to solve this issue.
View ArticleForum Post: Overflow detected on VIP1
I use DVR_RDK4.0 , My hardware is our custom dm8148(PG2.1) board, video souce is connect to VIP1 PORTA, my video input resolution is 1920x1080 .I am able to run VCAP_VDEC usecase and can see the...
View Article