Forum Post: RE: Wrong endianess for IQmath_c64x+e_elf.lib?
Hi Rahul,Is not there the plan that an updated version that fixes the issue is released?Best regards,Daisuke
View ArticleForum Post: RE: decode bitstreams problem
What is the issue you are seeing. I ran with DVR RDK 4.0 using the decode display demo and don't see any issue.The following frames are reported to be in error:[m3video]...
View ArticleForum Post: RE: Card detect pin connectivity in case of eMMC card on DM8148
Vikas,[quote user="Vikas Rustagi"]So shouldn't we make this pin pulled LOW to fool processor, that eMMC is permanently connected insted of HIGH?[/quote]In eMMC case, SD1_SDCD pin is not used (it is...
View ArticleForum Post: RE: Fill blank window in swms with blue Box
I am not clear on what you want to do. Pls provide more details.Do you want the SwMs blank window to display blue color ? - The system blank video frame is common and used in several modules like...
View ArticleForum Post: RE: uPP start signal timing and enable
Hi ChadThank you for your reply. Is Timing chart of uPP UG shown below a graph when the Start signal is Enabled(UPICR.START=1)?"Figure 2-4 Signal Timing for uPP Channel in Receive Mode with Single...
View ArticleForum Post: RE: ti8147 hangs on attempt to use vpss after resume
Hi Pavel,Ok, so you have indeed confirmed my worst fear - that TI shipped a product claiming it supports suspend/resume, but for some reason they don't think that should include the LCD. Wow. That's...
View ArticleForum Post: RE: DM3730: NFS filesystem
Hi Sezai,There are various ways to configure the network interface on your board.1. The first way is to use bootargs as we discuss this option in the previous posts of the present thread.2. The ip...
View ArticleForum Post: RE: Who resets HDMI IP Core Audio Video Register ACR_CTRL?
Zhichao,This thread is about "Who resets HDMI IP Core Audio Video Register ACR_CTRL?". Your post is about compilation problems, not about ACR generation. Please open up a separate post, and do not...
View ArticleForum Post: RE: OMAPL-138 VPIF Linux
a> 0x40 address to write and 0x41 to read (ADV7180 datasheet)b> 10 bit ADC, 8bit video interfacec> This is SDTV interfaced> I tested ADV7180 decoder under Windows XP(doesn`t work under...
View ArticleForum Post: K2H12 Keystone II TSREFCLK SyncE clock
Greetings,If I am not using Sync-Ethernet / IEEE1588, can I leave TSREFCLKN and TSREFCLKP as NC?Thanks,Justin
View ArticleForum Post: RE: OMAP3530 DSP EDMA
Hi,I am using linux OS with BeagleBoard toolchain set up for cross compilation. Communication between DSP and GPP is working (POOL, MSGQ).I want to use EDMA for transfering data from GPMC.Muez
View ArticleForum Post: RE: DM8148 + EZSDK 5.05.02.00: DVO2 Display "glitching"
This may be related to a known issue. What version of silicon do you have on your system?Please check advisory 2.1.68 in the silicon errata on the product folder...
View ArticleForum Post: RE: Not Able to play Decode-Display demo of RDK with resolution...
Hi Badri,Thanks for the reply.we are using mcfw_demo and it has a structure VDIS_MOSAIC_S for mosaic parameters initialization and it is not having any member "winInfo.bypass" .we found that it is...
View ArticleForum Post: syslink_2_20_02_20 - Compilation Error
Hi,I moved from EZ SDK 5.03.00.09 to 5.05.02.00, therefore syslink version changed from 2_00_04_83 to 2_20_02_20. I receive compilation error in the new syslink, it appears that there is a bug in this...
View ArticleForum Post: 6748 NDK porting
Hi, I am porting the NDK stack onto our custom board. We are using the 6748 with a different PHY chip that what is on the 6748 LCDK. We are running in RMII mode. I First tested my code without...
View ArticleForum Post: RE: Some errors occured when the C6678 is running in the -40℃.
Brian,There aren't any known issues for this. Is this only on one device or multiple devices that you're observing this? Did you try it at slightly warmer temps to see if/when it goes away?What are...
View ArticleForum Post: RE: DM6467T - VPIF 720p Input on 8-Bit BT.656-like Interface
Oops. I mix those terms all the time. Is there a component video decoder IC known to be compatible for this purpose?
View ArticleForum Post: RE: Can I use TMDXEVM6614LXE w/ CI2EVMBOC or TMDXEVMPCI for...
TCI66xx devices such as TCI6614 are directly supported through your local field applications engineers (FAEs) and are not supported on the E2E forums. Please contact your local FAE for support of...
View ArticleForum Post: RE: How to config INTD and AINTC on TCI6614?
TCI66xx devices such as TCI6614 are directly supported through your local field applications engineers (FAEs) and are not supported on the E2E forums. Please contact your local FAE for support of...
View ArticleForum Post: RE: Omapl138E ARM boot problem.
Hi Nick,Could you please check the gel files used to connect the target has the required initialization?Please refer the gel files of OMAP-L137 for modification.Thanks.
View Article