Forum Post: RE: Some questions about desktop linux sdk?
Hi,Steven:I know the point what you say above telling the difference between pcie and hyperlink.But you don'treply my question directly. My question is how DSPA access DSPB's memory...
View ArticleForum Post: RE: ti-sdk-beagleboard-06.00.00 Power button
Hi Shulev,Can you give me any input for suspend/resume support.I want to do the suspend from my custom battery driver.Regards,Dibin
View ArticleForum Post: RE: C6713 Jump from Bootloader to Application
You cannot disable the L1P/L1D on the c671x. I expect your problem is one of cache coherence. Are you performing manual cache operations before branching to an application? So in particular, in your...
View ArticleForum Post: SPRU889 correction
Hi,This is my first post here. I'm not sure whether this is the right place to post about doc . I would like to point out a mistake in doc SPRU889, figure 6-7 shows T filter but the caption is PI...
View ArticleForum Post: Spi read problem
Hello everyone,I'm using SPI in WinCE 6.0 on devkit8000 (omap3530). When I use WriteFile it works fine but when I use ReadFile it doesn't work!can you explain what's the problem, please? Is it the...
View ArticleForum Post: i2c transfer failed at vps_ti814x_select_video_decoder 191 with...
HI, I am trying to insert the vpss module and i am facing the i2c problem i.e. i2c transfer failed at vps_ti814x_select_video_decoder 191 with error code -110following are the commands used to...
View ArticleForum Post: RE: Three mmc's on 8148
Hi,I'm working on bringing up wl18xx module in TI8148 + IO expansion daughter card.I'd set up ti-ezsdk_dm814x-evm_5_05_02_00. I'm using wl18xx compat wireless package.Since wlan needs MMC0 port, I...
View ArticleForum Post: "I2C: Transfer failed at vps_ti814x_select_video_decoder 191 with...
HI, I am trying to insert the vpss module and i am facing the i2c problemi.e. i2c transfer failed at vps_ti814x_select_video_decoder 191 with error code -110following are the commands used to...
View ArticleForum Post: How to avoid ipv6 stuff in linux kernel
Hi, While booting Linux kernel it was throwing the ipv6 related errors, presently I don't have the requirement of ipv6 so please let me know how avoid the ipv6 issue.I am getting this...
View ArticleForum Post: RE: How to disable loading ipv6.ko
Hi Vladimir, I am getting this log at boot time and i am facing problem in collecting the boot up dmesg logs which are useful for other modules. Can we avoide those logs even...
View ArticleForum Post: RE: problem booting DVRRDK on DM814x-EVM
Badri,Just to wrap this thread up - we were indeed able to get the decode sample to work with the DM814x-EVM. The issue was a problem with the Makefiles when my co-worker tried to point the RDK output...
View ArticleForum Post: RE: Problem with available partitions
Hello, Titus Rathinaraj Stalin.Thank you for your detailed answers.>>Q1) Are you using EVM board or custom ? Yes, my own board has DDR2 and NAND 8bits configuration.>>Q2) Which kernel...
View ArticleForum Post: RE: C66x core cryptographic algorithm optimization
HR (and TI guys)-sprabf2 doesn't appear to have non-multiply specific examples.One way to narrow my question would be ask: -using 16-bit operands (i.e. following the dictum of using smallest...
View ArticleForum Post: RE: New Custom AM1802 Board Boot from SD Card
OK, that patch that I talked about is actually a patch for uflash, not uboot. "The released U-boot package requires a patch to be integrated" while technically correct since uflash is bundled with...
View ArticleForum Post: Static power of two EVMC6678 are different
Hi, Dear AllI have a question about the static power consumption of EVMC6678 board. I am using the GPIO to USB cable and power monitor software to measure the power consumption of the DSP chip. But I...
View ArticleForum Post: RE: "I2C: Transfer failed at vps_ti814x_select_video_decoder 191...
Hi, In the linux driver code at location arch/arm/mach-omap2/board-ti8148evm.c I think that pcf8575_client->adapter pointer which contains the reference to...
View ArticleForum Post: DM6446 USB performance for MSC
Hi Team,I am looking for the performance data of USB on DM6446 device with linux kernel PSP release http://processors.wiki.ti.com/index.php/DaVinci_(ARM9)_PSP_ReleasesAbove link has the driver...
View ArticleForum Post: RE: Problem with available partitions
Hello.Pleasefilehere (Please visit the site to view this file). Thanks.
View ArticleForum Post: VPSS module insertion problem in DM8148 EVM
HI ,I am using DM8148 EVM. My PSP version is 04.04.00.02. I have followed the following link for vpsshttp://processors.wiki.ti.com/index.php/TI81XX_PSP_VPSS_Video_Driver_User_GuideAfter flashing the...
View ArticleForum Post: How KeyStone's NetCP is represented in keystone2_defconfig?
I am going through Keystone 2 defconfig file and wanted to know how NetCp support is provided in defconfig,For other vendors support for Ethernet controller has provided like...
View Article