Forum Post: RE: PCIe to PCIe using two C6657 EVMs
Thanks Tom,We actually looked at this board before but the Xilinx FPGA EVK (SP605) has a pcie x1 connector. We already have the AMC to PCIe adaptor from TI (TMDXEVMPCI) and we need a way to connect the...
View ArticleForum Post: RE: Unlaoding and reloading OMX components
Hello Rob,[quote user="Robert Dahlgren1"]I've attached a log file, but I don't know if it will show anything, I don't see any reference to the DSP components in there.[/quote]To view the DSP trace you...
View ArticleForum Post: RE: question on L138 USB cppi dma rx
Hi Shankari, Thanks for your advise, i'll try to transplant the linux driver to OMAPL138.Huang.
View ArticleForum Post: RE: Re:Capturing video at 576i@50 in DM8148 EVM
Hello,[quote user="debasish saha1"]1) what are the changes I need to do in ti81xxvin driver for capturing a video at 576i ?[/quote]I would recommend you to check what resolutions are supported by...
View ArticleForum Post: RE: how to dynamically change from NCP to ECP between symbols in...
Perfect. Thank you Albert.Best regards,Angelo
View ArticleForum Post: RE: What's the difference between the First Order and Second...
Su,Can you be more specific on your problem?If it is for how to select, the table-9 (for AIF2, SRIO, or HyperLink) and table-17 (for PCIe and SGMII) show how.If it is for what is the performance...
View ArticleForum Post: H264: 2 x Super High Definition
Hello,Could anyone please confirm that the Ti's H.264 can encode 2 super high definition streams i.e. 2560x1600 (x2)? If not, then what are the limitations?I am using the dm816 on SDK 5_04_00_11.kalex
View ArticleForum Post: RE: Some questions about desktop linux sdk?
Steve,PCIe is the standard protocol for high-speed serial computer expansion bus design, which is developed and maintained by lots of companies and groups. It is different from HyperLink, which is the...
View ArticleForum Post: RE: AM1802 JTAG Connection Problems
Thanks, I really appreciate you looking into this. With so many variables going on it's nice to know at least 1 thing that should work!.I did do a quick test and I was able to change the SRAM memory as...
View ArticleForum Post: RE: TI 6713 hangs/stalls when debugging code - code stability...
[quote user="Jack Harris1"]I've attached my (now old) STFT code, the version I am working on at the moment basically swaps my custom 'jack_fft' function (which is almost identical to fft example...
View ArticleForum Post: RE: Read Permissions for Queue Manager Subsystem
You can find clues in the MPU2 Fault Status Register value (0x0E080010), bits field [5:0] is 10000b which means "Supervisor Write Fault" is the cause of this access error based on the description in...
View ArticleForum Post: RE: Missing symbols in mathlib 3.1.0.0
Hi Ian,Thanks for the help, now I'm able to build succesfully too. I hope the mathlib team will create a new version where both the header and linking issues are resolved in a better way.I will upload...
View ArticleForum Post: RE: TSK_Sleep necessary for sending UDP data?
To clarify the tasks: NetworkTask (priority of 8) - this task is creating the network (NC_SystemOpen, NC_NetStart, etc).TxDataTask (priority of 4) - this task is opening up a UDP socket, and has the...
View ArticleForum Post: RE: New AM1802 Custom Board Bring-up
OK, I would now say that I am finally at a point where I can test the RAM. I loaded the LCDK OMAP-L138 GEL file and with that GEL I am able to write to the correct RAM location. I was also able to load...
View ArticleForum Post: RE: 66AK2H12 K2H EVM SPI Communications
Hi, Justin,Good to know that u-boot is working now. I'll modify it further so that it works for other TI platforms and we can push it upstream.Yes, it is in dts file. In MCSDK 3.0.3.15, it has cs 0 and...
View ArticleForum Post: RE: RTC EVM5515
Hi Albert,Program the RTCCLKOUTEN bit in RTC Power Management Register (RTCPMGT) register (1930h)1 = RTC clock output enabled.Hope this helps,Mark
View ArticleForum Post: RE: Facial Recognition using c6748
Thank you. Yes there is a example of Face Detection but I wanted a example for Facial Recoginition please
View ArticleForum Post: RE: How to look up ioport ?
Which DSP device are you using ..Can you provide more information.RegardsVasanth
View ArticleForum Post: RE: UDP sending performance on DM8148
Pavel,Not exactly that way.My test result shows the next:DM8148EVM(sender) ---> cross cable ---> DM8148EVM(receiver) : GoodDM8148EVM(sender) ---> switch ---> DM8148EVM(receiver) :...
View ArticleForum Post: TMDXEVM6678L board error with PCIe in Ubuntu12.04
Hi, I plugged my board in the PCIe slot and ran the demonstration application on it using Desktop Linux SDK, following this link:...
View Article