Clik here to view.
Forum Post: BUILD PROJECTS OMAP L134 LCDK XDS ERROR
Hi,I have been trying to get the OMAP L138/C6748 Working without much luck using my single computer licensed copy of CCS Version: 5.5.0.00077 .I have tried three different platforms, Linux,...
View ArticleForum Post: LCDKC6748 BOM
I am developing a product based on the LCDKC6748 and have downloaded the schematic and "BOM" but the BOM isn't in the zip file. I tried generating the BOM from the OrCAD file but the parts listed in...
View ArticleForum Post: RE: VoLIB Multichannel Memory Usage and Specific Module...
David-Thanks for moving the thread for us. The root of our question is how data buffers are used. In the TI TDU algorithm, there are 938 bytes of dedicated buffers and one 1024 byte scratch buffer,...
View ArticleForum Post: RE: TSK_Sleep necessary for sending UDP data?
Hi Eric,I'm running the 6670 (EVM) with the following:MCSDK 1.1.2.6NDK 2.21.2.43The code was based on hello world as the example.
View ArticleForum Post: Porting program using EMIF for network chip to DSP/BIOS
Dear forum members,ezDsp5502 kit contains a demo application for using the on-board network chip, driving by EMIF. After doing trivial porting: new project -> dsp/bios example -> copying files...
View ArticleForum Post: RE: Short time Fourier transform library function ?
Sivaraj, many thanks for the reply,I was rather hoping there was a library function for the STFT, I am currently using a similar FFT function in a loop-like manner to go through my time domain signal...
View ArticleForum Post: RE: ATA FS C5535 without BIOS
I ported EFSL with some effort, and it now works well. It has mechanisms for pulling data from data structures that can accommodate the 16-bit architecture.Regards,Bill
View ArticleForum Post: RE: TCI6638K2K: mutal exclusion between DSP and ARM
HiAny update on this? I too am looking at a way to protect a shared resource across DSPs and ARM using the same HW semaphore.How is this done from Linux user space?Thanks
View ArticleForum Post: RE: JPEG encoding problem on DM3730
Hello,Here is the development environment for two cases:OMAP3530:Yocto Project 1.4 Dylan, meta-ti Dylan layer...
View ArticleForum Post: RE: 66AK2H12 K2H EVM SPI Communications
I'm taking the kernel out of the picture here, and just trying to verify SPI communications from U-boot. At first I recompiled U-boot to allow any bus and cs value, as well as assigned the proper SPI...
View ArticleForum Post: TMS320C6657 Lite Evaluation Module no longer connects to any...
I bought a TMS320C6657 Lite Evaluation Module about a month ago and last week was working on running the pre programmed demo after following the instructions provided and installing all needed drivers...
View ArticleForum Post: McASP driver for SYS/BIOS
Greetings,I wonder if it is possible to directly McASP by C674x core of DM814x. According to the following post, McASP driver for SYS/BIOS was supposed to be available on early...
View ArticleForum Post: RE: McASP WFIFO
Hi Sivaraj,The recommended thread confirms for me that my McASP port and WFIFOCTL configuration looks correct. I can get a clean test tone out of the port as long as I service the WFIFO every time it...
View ArticleForum Post: RE: C5515 Audio Player from SD
Hello Mihai,This article is pretty close to what you have requested (MP3 instead of WAV). You can sign up and download the...
View ArticleForum Post: RE: Big Endian library missing from TI_keystone_bcp_ssl_patch
Hi Piyush,Please find the big endian version of the Soft Slicer Patch for C6618/C6670 attached. We will upload it to the formal download link in due course.Regards-Nitin
View ArticleClik here to view.
Forum Post: RE: New AM1802 Custom Board Bring-up
Hi George,It is just the state it puts it in after it connectsRegardsAntony
View ArticleForum Post: RE: MDIO USERACCESS1 Interrupt on the C6670 seems to trigger...
Hi Lance,Could you please test the following on your EVM and let us know if it solves the issue of two interrupts per read at your end:Modify the code in your ISR so that the clearing of the system...
View ArticleForum Post: RE: The connection between Teranet and PCIe on K2H
Hello Steven,I was a little confused about bit and byte. But I understand your kind reply. So, I'd like to know one more thing. What size is PCIe burst size which is like EDMA3 default burst size...
View ArticleForum Post: RE: UBL and U-BOOT flash issue through UART
I had this exact problem with sfh_ on a Leopard DM36x board.I had a lot of trouble using the sfh_ utility. The to solve it was to use the slh_ utility instead to load a valid u-boot image to RAM. Once...
View Article