Forum Post: Where is the DM814x SGX speed set?
TI folks,We have developed a product based on the DM814x, using:DM814x PG 3.0EZSDK 5.05.02.00EZSDK OMX/HDVPSS Overlay 5.05.02.00PSP 04.04.00.02Most of the Arago updates for both linux and u-boot in...
View ArticleForum Post: DM8107 RDK Interlaced NTSC Field at a time scale issue
I am experiencing an issue with field at a time capture of NTSC video being passed through the scaler on the RDK. The scaler seems to distort the 720x240 fields even though it is set up to scale...
View ArticleForum Post: RE: IPNC RDK3.5, capture video display on LCD
Hello every oneMy question is how to use ipnc use case capture video display to LCD.Thanks.
View ArticleForum Post: RE: C5505 ezDSP USB Development Tool additional inputs and outputs
I didn't get your e-mail, but I think I found what I needed on my own. I'll take a look at what you posted as well. If there is any more information in the e-mail, could you please resend it?
View ArticleForum Post: Matlab fdatool and C5505 ezdsp
I've been trying to create my own filters for use in the ezdsp usb development tool, but nothing I do seems to work. I've been using matlab's fdatool to generate filter coefficients. Right now, I'm...
View ArticleForum Post: AM1802 JTAG Connection Problems
I have another post going but I wanted this one to be specific to JTAG since I'm not having much luck. I have the AM1808 eXperimenter board with the Blackhawk USB100v2 JTAG Controller. I am using CCS5...
View ArticleForum Post: DM8148 pinMux
Hello friends,I works with DM8148 and dvr-rdk version 3.5 from udworks,Please let me know where is placed pinmux file used for device configuration?I mean into kernel folder, HDVPSS folder, etc..?
View ArticleForum Post: Multcore navigator issue seen on multicore application on c6678.
Hi,I am having some issues with the multicore navigator in my multicore application. Here are my tools details. I am using ccsv 5.2.1.18, mcsdk 2_01_02_05, pdk_c6678_1_1_2_5.The relevant parts of my...
View ArticleForum Post: RE: VoLIB Multichannel Memory Usage and Specific Module...
Chris,I went ahead and moved this thread over to the device forum to help get it a faster response.
View ArticleForum Post: RE: Cann't display resolution of 2048*1536
the debug is below: [m3vpss ] 498296: MP_SCLR: - Input Resolution Changed, updating... [m3vpss ] MP_SCLR: numPixelsPerLine[0],inFmt.width[2048],outFmt.width[0] [m3vpss ] MP_SCLR: chID[4]Res[0]...
View ArticleForum Post: RE: Correct Emulator for TMDXLCDK138 kit ?
Thank-you Shankari and Pubesh,This is great.All the best,Robert
View ArticleForum Post: RE: C6748 Booting issue
Hi,For time being, I am also interested in using DSP of omap l138.But as posted in this link, I am also facing same problem while booting c6748 from flash.I am using latest version of sfh, but still...
View ArticleForum Post: OMAPL138
Hi, our board is based on OMAP-L138_C6748 LC DEV KIT VER A6A board schematic with DSP + ARM OmapL138 processor, this board is working fine but for future product design, we plan to use...
View ArticleForum Post: RE: Confirmation of how to connect TMS320C6713B with Flash,RAM...
Okay I don't know if its the right thing to do but now there are no errors in the code.I am still copying the exact code to interface flash with EMIF provided in Appendix B of spra568. The only change...
View ArticleForum Post: MessageQ over SRIO and shared memory
Hi All, I want to use MessageQ over SRIO for chip to chip communication and shared memory for Core to Core communication , how can I do? I want to refer to the method below post...
View ArticleForum Post: RE: AM1808 reference design
The AM1808 Product Folder should be a good starting point resource for information that you need to design with the AM1808.The AM1808 is a pin-for-pin compatible device to the OMAP-L138. In the Design...
View ArticleForum Post: RE: optimizing EDMA PCIe transfers for read/write and multiple cores
Steven,We may have found the cause of the problem. The interrupt bit indicating transfer complete was getting set prematurely. Adding delay after the call to memory_transfer() was an interim...
View Article