Clik here to view.
Forum Post: RE: Issues about the input of H264 decoder in DVRRDK
Hi Yogesh,I have get the DVRRDK4.0, but I could not find the dvrapp or module folders in DVRRDK_04.00.00.03\dvr_rdk\ folder.
View ArticleForum Post: RE: help in using spi of c6678 for programming beamformer...
Please any body can answer to my question, solve my doubt. If my question is not clear also please mention and correct me.Hi, I need to programme the Beamformer and AFE and one more slave through...
View ArticleForum Post: How to change a frame data in HelloWorld Alg DM8168?
The platform is DM8168 EVM + Daughter Card + DVRRDK3.0The Arm side, I change the code fllow: helloWorldPrm.inQueParams.prevLinkId = ipcFramesInDspId; helloWorldPrm.inQueParams.prevLinkQueId =...
View ArticleForum Post: RE: Modifying Bayer pattern on DM385 IPNC RDK
Thanks for your answer ravikran,eventually with the help of DCC tuning tool I've found the right register - it was SRC_COL defined in that same file. The problem was that I didn't notice it got...
View ArticleForum Post: RE: EDMA3 Event Set Register access time
Hi, I've tried using QDMA with a trigger word to start the transfer. This doesn't really help.I still have a cycle count of around 400000, of which 272000 are caused by the writing to the paRAM set.I...
View ArticleClik here to view.
Forum Post: question about C6678 hyperlink
we have designed a board which have two C6678 DSP. I have running the PDK example of hyperlink provided by TI, the write/read come about error, the following picture show the detailsI have following...
View ArticleForum Post: RE: Assembly works on simulator, not hardware. Pipelined Assembly...
Chris,Which DSP is on the two radios?Please be sure to read the description of the CPU CA simulator in the Target Configuration window. There should be no issue with bit accuracy, but timing accuracy...
View ArticleForum Post: RE: Problem in communicating with a flash device
Renjith,Udelay is the standard way for putting short delays. It is used extensively throughout the kernel, and in nand_base.c specifically.This means that the stalls I am experiencing may appear in...
View ArticleForum Post: QUESTIONS on 6678 PCIe multi message msi dma and inbound...
I'm working on my board which has 6678(RC) and v6 FPGA(EP) connected with pcie. We are working on this kind of unnormal type that Dsp will send some memory write packets to FPGA via pcie to start a...
View ArticleForum Post: RE: BIOS task load issues on a delay effect using MMC SD card
OK I have finally been able to configure automatic TX DMA with ping-pong buffer for both channels. Performance has improved considerably. 48 KHz sampling seems feasible with a 20% CPU load. SD card...
View ArticleForum Post: RE: How to integrate a custom iUniversal algorithm into the RPE...
Ram, Thanks a lot. I have rewound the whole system and modified dependencies again. This time, I get to successfully compile the dvr_rdk project. Maybe something was ruined occationally when I...
View ArticleForum Post: uImage kernel: Able to change files within a uImage for DM368?
Preface, I'm not a developer or engineer.I have an IP camera based on the DM368 that the manufacturer no longer supports. I would like to change out some language files (.wav's) within the uImage...
View ArticleClik here to view.
Forum Post: Does Appro DM368 ipnc support IMX122?
Hi all: We got Appro IPNC_DM368_IMX122_2.6_Release20130417 software package.But when we compile and test it.we found error result.And when the ipnc display black and white color video, it displays...
View ArticleForum Post: how to compile some files in videnc_copy of omap3530
dvsdk is dvsdk_4_01_00_09_omap3530.my board is omap3530.I want to use codec engine for my code.So I add some files in dvsdk/codec-engine_2_26_01_09/examples/ti/sdo/ce/examples/codecs/videnc_copy.but I...
View ArticleForum Post: RE: After we plug one more 720P60 camera,the live555 server in...
So sorry for my bad description.Plug three 720P60 camera,I mean that dm8168 connects to THREE CAMERA through vip port,not through ethernet from ipnc source.
View ArticleForum Post: RE: hdvpss - video output with SD composite
Thank you for replay.Now I can see the capture, but the color is incorrect. The frame only displays "black and white", no red, blue.....etc. (even the color bar)Is there any suggestion?Regards,Killo
View ArticleForum Post: DDR3 MT41J128M16 not working with DM8148?
Hello All,We have made a custom board based on DM8148, using DDR3 "MT41J128M16 JT-125" from micron.What all we are expected to do in u-boot to get DDR access working by programming DDR3 controller in...
View ArticleForum Post: RE: OMAPL138-LCDK example for camera sensor
Hi Katerina,I am now working on the same issue, using the C6748 LCDK to drive the Leopard image sensor and my module is AR0331, which comes with a LI-CAM_AR0331 board.The same question exists here, plz...
View ArticleForum Post: Bootp request not coming?
Hello All,We have made a custom board based on DM8148, in which the normal boot sequence is "eMMC, SPI, UART, ethernet".and eMMC is permanently mounted behind mmc.Now on a fresh board bring up, we were...
View Article