Hi llich,
1.We have updated the wiki wih the updated schematics reflect the MT29F4G16ABADAH4-IT:D
2.Regarding with the connector for a Leopard camera (J16) well I plugged a Leopard camera (LI-CAM-OV2715) but nothing happened because exist a problem with the pixel clock caused by the component 74LVC1G126DBV (U27) used for the TVP5147M1PFP (U21). I have to remove this component in order to fix the problem otherwise the pixel clock was near to high level (never descend to low level). What can I do instead remove the U27 component? Have you probed the U27 OE pin at this condition? Can you check R41 Pull-up resistor is mounted? If mounted can you please remove and change it to 4.7K and check again.
3.One more thing, I plugged a monitor LCD (Samsung) to a VGA connector (J8) and the LDCKC6748 stopped. I guess that the connection with the monitor caused an overvoltage because the Power Manager (TPS650250RHBR/U3) stop to generate the necessary voltage. Is that assumption correct? VGA connector power 5V_IN is sourced directly from the external adapter .So, there should not be any problem with the Power drop just in case try with other adapter which is capable of handling more power .Check you monitor earth condition check any leakage voltage at the VGA connector shield. Check the cable for VCC and GND short . Try other VGA cable and monitor.
Regards
Antony