Hi,
I am using the DM8148 EVM. After I start the board with the original SD card which came with the board, and take a dmesg log, I found that vpss module insertion which is done through load-hd-firmware.sh is giving the following error message while inserting.
VPSS_CAPTURE: cap init
omap_i2c omap_i2c.3: controller timed out
I2C: Transfer failed at vps_ti814x_select_video_decoder 188 with error code: -110
In the load-hd-firmware.sh script in line no. 33 the following command is responsible for inserting the vpss module
" modprobe vpss sbufaddr=0xBFB00000 mode=hdmi:1080p-60 i2c_mode=1 "
I have attached the full dmesg log. The error can be found in line no. 607 of the dmesg logs.
(Please visit the site to view this file)
Thanks,
Debasish