Hi all,
I am trying to run Messageq app on my evmc6678, but I am getting following error as shown below. I build syslink as follows.
1 ) editing setenv with
* ) export BUILD_SYSLINK=yes
* ) ./prj config
* ) ./prj build
Please let me know if I have missed any steps.
When I run ./messageq_app_test_8_core.sh. I get following errror
LOG :
/opt/syslink_evmc6678.el # ./messageq_app_test_8_core.sh
Beginning of MessageQ sample application run
insmod syslink.ko
SysLink version : 02.00.00.68_beta1
SysLink module created on Date:Dec 4 2013 Time:16:36:18
Entered KnlUtilsDrv_initializeModule
traceMask value: 0x0
Leaving KnlUtilsDrv_initializeModule 0x0
Loading and running slave core 1
ELF: ELF
ELF file header entry point: 8204c0
Program entry address: 0x8204c0
Program entry address not 10bit aligned trying to use reset vector table
Reset vector address: 0x838400
Started Program execution on core: 1
Loading and running slave core 2
ELF: ELF
ELF file header entry point: 8204c0
Program entry address: 0x8204c0
Program entry address not 10bit aligned trying to use reset vector table
Reset vector address: 0x838400
Started Program execution on core: 2
Loading and running slave core 3
ELF: ELF
ELF file header entry point: 8204c0
Program entry address: 0x8204c0
Program entry address not 10bit aligned trying to use reset vector table
Reset vector address: 0x838400
Started Program execution on core: 3
Loading and running slave core 4
ELF: ELF
ELF file header entry point: 8204c0
Program entry address: 0x8204c0
Program entry address not 10bit aligned trying to use reset vector table
Reset vector address: 0x838400
Started Program execution on core: 4
Loading and running slave core 5
ELF: ELF
ELF file header entry point: 8204c0
Program entry address: 0x8204c0
Program entry address not 10bit aligned trying to use reset vector table
Reset vector address: 0x838400
Started Program execution on core: 5
Loading and running slave core 6
ELF: ELF
ELF file header entry point: 8204c0
Program entry address: 0x8204c0
Program entry address not 10bit aligned trying to use reset vector table
Reset vector address: 0x838400
Started Program execution on core: 6
Loading and running slave core 7
ELF: ELF
ELF file header entry point: 8204c0
Program entry address: 0x8204c0
Program entry address not 10bit aligned trying Assertion at Line no: 302 in /home/mistral/linux-c6x-2.0.d
to use reset vecAssertion at Line no: 302 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/d
tor table
ResetAssertion at Line no: 302 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/ti/syslink/d
vector address:Assertion at Line no: 302 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/d
0x838400
StartAssertion at Line no: 302 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/ti/syslink/d
ed Program execuAssertion at Line no: 302 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/d
Assertion at Line no: 302 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/ti/syslink/utilsd
Running messageAssertion at Line no: 318 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/td
q User land sampAssertion at Line no: 318 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/d
le application
Assertion at Line no: 318 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/ti/syslink/utilsd
MessageQApp sampAssertion at Line no: 318 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/d
le application
Assertion at Line no: 318 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/ti/syslink/utilsd
MessageQApp_starAssertion at Line no: 318 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/d
tup entered
EntAssertion at Line no: 318 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/ti/syslink/utd
ered SysLinkSampAssertion at Line no: 302 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/d
les_startup
SysAssertion at Line no: 302 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/ti/syslink/utd
LinkSamples_osStAssertion at Line no: 302 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/d
artup
SysLinkSaAssertion at Line no: 302 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/ti/sysld
mples_setToRunProcIds
Loading and starting procId [1] with [(null)]
Entered ProcMgrApp_startup
ProcMgr_attach status: [0x97d2000]
After attach: ProcMgr_getState
state [0x4]
Error in Ipc_control Ipc_CONTROLCMD_LOADCALLBACK [0xffffffff]
ProcMgr_close status: [0x97d2000]
Leaving ProcMgrApp_startup
ProcMgrApp_startup status [0]
Loading and starting procId [2] with [(null)]
Entered ProcMgrApp_startup
ProcMgr_attach status: [0x97d2000]
After attach: ProcMgr_getState
state [0x4]
Error in Ipc_control Ipc_CONTROLCMD_LOADCALLBACK [0xffffffff]
ProcMgr_close status: [0x97d2000]
Leaving ProcMgrApp_startup
ProcMgrApp_startup status [0]
Loading and starting procId [3] with [(null)]
Entered ProcMgrApp_startup
ProcMgr_attach status: [0x97d2000]
After attach: ProcMgr_getState
state [0x4]
Error in Ipc_control Ipc_CONTROLCMD_LOADCALLBACK [0xffffffff]
ProcMgr_close status: [0x97d2000]
Leaving ProcMgrApp_startup
ProcMgrApp_startup status [0]
Loading and starting procId [4] with [(null)]
Entered ProcMgrApp_startup
ProcMgr_attach status: [0x97d2000]
After attach: ProcMgr_getState
state [0x4]
Error in Ipc_control Ipc_CONTROLCMD_LOADCALLBACK [0xffffffff]
ProcMgr_close status: [0x97d2000]
Leaving ProcMgrApp_startup
ProcMgrApp_startup status [0]
Loading and starting procId [5] with [(null)]
Entered ProcMgrApp_startup
ProcMgr_attach status: [0x97d2000]
After attach: ProcMgr_getState
state [0x4]
Error in Ipc_control Ipc_CONTROLCMD_LOADCALLBACK [0xffffffff]
ProcMgr_close status: [0x97d2000]
Leaving ProcMgrApp_startup
ProcMgrApp_startup status [0]
Loading and starting procId [6] with [(null)]
Entered ProcMgrApp_startup
ProcMgr_attach status: [0x97d2000]
After attach: ProcMgr_getState
state [0x4]
Error in Ipc_control Ipc_CONTROLCMD_LOADCALLBACK [0xffffffff]
ProcMgr_close status: [0x97d2000]
Leaving ProcMgrApp_startup
ProcMgrApp_startup status [0]
Loading and starting procId [7] with [(null)]
Entered ProcMgrApp_startup
ProcMgr_attach status: [0x97d2000]
After attach: ProcMgr_getState
state [0x4]
Error in Ipc_control Ipc_CONTROLCMD_LOADCALLBACK [0xffffffff]
ProcMgr_close status: [0x97d2000]
Leaving ProcMgrApp_startup
ProcMgrApp_startup status [0]
Leaving MessageQApp_startup 0
Entered MessageQApp_execute
MessageQApp_threadHandler entered
Leaving MessageQApp_threadHandler fffffff9
MessageQApp_threadHandler entered
Leaving MessageQApp_threadHandler fffffff9
MessageQApp_threadHandler entered
Leaving MessageQApp_threadHandler fffffff9
MessageQApp_threadHandler entered
Leaving MessageQApp_threadHandler fffffff9
MessageQApp_threadHandler entered
Leaving MessageQApp_threadHandler fffffff9
MessageQApp_threadHandler entered
Leaving MessageQApp_threadHandler fffffff9
MessageQApp_threadHandler entered
Leaving MessageQApp_threadHandler fffffff9
Leaving MessageQApp_execute
Entered MessageQApp_shutdown()
Shutting down procId [1]
Entered ProcMgrApp_shutdown
Ipc_control Ipc_CONTROLCMD_STOPCALLBACK status: [0xffffffff]
ProcMgr_detach status: [0x6a85000]
After detach: ProcMgr_getState
state [0x0]
ProcMgr_close status: [0x0]
Leaving ProcMgrApp_shutdown
ProcMgrApp_shutdown status [0]
Shutting down procId [2]
Entered ProcMgrApp_shutdown
Ipc_control Ipc_CONTROLCMD_STOPCALLBACK status: [0xffffffff]
ProcMgr_detach status: [0x6a85000]
After detach: ProcMgr_getState
state [0x0]
ProcMgr_close status: [0x0]
Leaving ProcMgrApp_shutdown
ProcMgrApp_shutdown status [0]
Shutting down procId [3]
Entered ProcMgrApp_shutdown
Ipc_control Ipc_CONTROLCMD_STOPCALLBACK status: [0xffffffff]
ProcMgr_detach status: [0x6a85000]
After detach: ProcMgr_getState
state [0x0]
ProcMgr_close status: [0x0]
Leaving ProcMgrApp_shutdown
ProcMgrApp_shutdown status [0]
Shutting down procId [4]
Entered ProcMgrApp_shutdown
Ipc_contrAssertion at Line no: 302 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/ti/sysld
ol Ipc_CONTROLCMAssertion at Line no: 302 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/d
D_STOPCALLBACK sAssertion at Line no: 302 in /home/mistral/linux-c6x-2.0.0.63/Build/syslink_evmc6678.el/d
tatus: [0xffffffff]
ProcMgr_detach status: [0x6a85000]
After dEntered KnlUtilsDrv_finalizeModule
etach: ProcMgr_getState
state [0x0]
ProcMgr_close status: [0x0]
Leaving ProcMgrApp_shutdown
ProcMgrApp_shutdown status [0]
Shutting down procId [5]
Entered ProcMgrApp_shutdown
Thanks
cheluvaraj