Part Number: SK-AM62B-P1 Tool/software: Booting from the eMMC is currently not working on the SK-AM62B-P1. Bootmode pins settings (B0-15): 1100001000000000 As you can see, I have them configured to boot from MMC0 using F/S UDA. I have partitioned and formatted the eMMC from both Linux and VxWorks. After partitioning and formatting, I write the following files to the eMMC: tiboot3.bin tispl.bin u-boot.img uEnv.txt When powering on the board, I see no response in the serial console. The board boots successfully when using the SD card (bootmode pin B9=1). I am using the following U-Boot version: Is there something in U-Boot that needs to be modified to allow booting from the eMMC?
↧